http://www.bcae1.com/temp/ausettingbias.swf
Turn the bias pot in the good channel slowly just until you see an increase like in the demo above.
Do the same for the distorted channel.
The amp has to be clamped to the heatsink when doing this.
Turn the bias pot in the good channel slowly just until you see an increase like in the demo above.
Do the same for the distorted channel.
The amp has to be clamped to the heatsink when doing this.
http://www.bcae1.com/temp/ausettingbias.swf
Turn the bias pot in the good channel slowly just until you see an increase like in the demo above.
Do the same for the distorted channel.
The amp has to be clamped to the heatsink when doing this.
Perry,
What do I use to open the attachment you sent? I cant open it.
Are you using a windows computer?
Yes
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- Rockford 500a2