Total DIY
This is DIY amplifier, PCB and the box hand made. To make PCB I used transfer method(Samsung laser printer) and a box was made out of alu L profiles and wood.
Only part that I bought redy made was preamp with remote control.
For more in deep information look at http://www.diyaudio.com/forums/solid-state/186981-bootstrapsccs-t-tmc.html
dado
This is DIY amplifier, PCB and the box hand made. To make PCB I used transfer method(Samsung laser printer) and a box was made out of alu L profiles and wood.
Only part that I bought redy made was preamp with remote control.
For more in deep information look at http://www.diyaudio.com/forums/solid-state/186981-bootstrapsccs-t-tmc.html
dado
Attachments
Are those JBL 250 versions/clones ?
Do you mean loudspeakers? That is an old design(over 30 years) with Dynaudio drivers, just the shape is similar to JBL.
I looked closely (your "deep" thread) and this.
Bravo , my man !!
Now , how can this sound so good with "contemporary" layout and the fact that it is a modified LIN amp ? I asked this question in developing just such an amp and how/why the little technical refinements would better the sound.
What you listen to might prove the "purists" wrong ? 95% is the circuit itself , short of any real bad layout decisions. You might get that extra 5% by "pulling out hair" (fussing) over layout/ grounding ... but can you "hear" that 5% ?
Might just be technical refinement just for the sake of technical refinement ?
As the output stage gets larger ... these little "technical" issues might show themselves , but- what works .. works!
PS- you have enough room for a dual mono power supply ...
Good job (even the case) true DIY !
OS
Bravo , my man !!
Now , how can this sound so good with "contemporary" layout and the fact that it is a modified LIN amp ? I asked this question in developing just such an amp and how/why the little technical refinements would better the sound.
What you listen to might prove the "purists" wrong ? 95% is the circuit itself , short of any real bad layout decisions. You might get that extra 5% by "pulling out hair" (fussing) over layout/ grounding ... but can you "hear" that 5% ?
Might just be technical refinement just for the sake of technical refinement ?
As the output stage gets larger ... these little "technical" issues might show themselves , but- what works .. works!
PS- you have enough room for a dual mono power supply ...
Good job (even the case) true DIY !
OS
Ahh, but turned upside down, it's a grill plate with a hot zone and medium heat areas.
LOL
very good!
But, nice looking amp Federman!
- Home
- Amplifiers
- Solid State
- Post your Solid State pics here