Happy New Year!
I've just received the package, however the 2 boards are missing (have also send you an email about it).
Hope you have still some boards left! 😉
I've just received the package, however the 2 boards are missing (have also send you an email about it).
Hope you have still some boards left! 😉
I do, my bad , no worries. Sending with DELCON "delivery confirmation" since it's available.
Regards
Tea
Thanks Mike.
Package has arrived today. Not fully checked but all seems to be in order.
More soldering to do now. 🙂
received...
my boards, all good.
Got one reflektor built last night, and another this morning. Both fired up right off the bat and just needed a little tuning on one to get the Vout right. One is going to power my B-IIIse board (5.27 V or so) and the other my Sonore Async USB interface/OSF (3.6 V or so)...
my boards, all good.
Got one reflektor built last night, and another this morning. Both fired up right off the bat and just needed a little tuning on one to get the Vout right. One is going to power my B-IIIse board (5.27 V or so) and the other my Sonore Async USB interface/OSF (3.6 V or so)...
Both of mine up and running...thanks!
Two green LEDs + schottky diode = 5.28V for DAC
Two IR LEDS (not included) + 82R gives 3.603V for USB board
Easy build!
Two green LEDs + schottky diode = 5.28V for DAC
Two IR LEDS (not included) + 82R gives 3.603V for USB board
Easy build!
Exactly - It took me an hour to get initial prototype built. Very easy build!
Kudos Salas.
Hi Mike,
I've just received the two boards that were missing in an earlier shipment. Thanks for your fast response and service! 🙂
I've just received the two boards that were missing in an earlier shipment. Thanks for your fast response and service! 🙂
Hi,
Just received mine two sets from customs. It seems i got one set of resistors extra. So if i'll need more reflectors in the future, I'll remind you to take out the resistors🙂
Sinks came before New Year.
Thanks!
Just received mine two sets from customs. It seems i got one set of resistors extra. So if i'll need more reflectors in the future, I'll remind you to take out the resistors🙂
Sinks came before New Year.
Thanks!
Any more
Hi Mike:
I know that you usually slightly over-order. Have a new project, and one of these would come in real handy. Any chance you have a spare?
Best,
Jon
Hi Mike:
I know that you usually slightly over-order. Have a new project, and one of these would come in real handy. Any chance you have a spare?
Best,
Jon
Hi Hon,
I still have plenty of the boards left,
Transistor kits and resistor kits.
I have only one "full kit" as described in first post.
Let be know I can send an invoice.
Okay, I got some more spare parts in to make a half-dozen full kits. PM if your interested.
If you did not get a PM from me and you already requested one, my apologies, please send another message and I will get invoice out.
If you did not get a PM from me and you already requested one, my apologies, please send another message and I will get invoice out.