A highly recommended 3-way arrangement with driver, 8-12" woofer and subs.
nice, actually very nice! ... what horns and drivers?
Any consideration to making a waveguide for the BG Neo3? Would make an already excellent driver near-perfect.
This sounds interesting!
110Hz Tractrix
Any pricing update on the 110Hz Tractrix horns? Also, what will the mount look like at the throat?
Any pricing update on the 110Hz Tractrix horns? Also, what will the mount look like at the throat?
Pricing on the 110hz Tractrix will probably need some type of adjusting due to their size. The cost to get a pallet shipped from Poland is very expensive after you figure in customs fees, taxes, taxes, and more taxes. Last time, the combined total was $1950 for shipping. I package them all up for free.
So if a pair or two of the 110's were ordered, it would seriously lower the number of items on the pallet, and the shipping would need to be divided out over less parts.
I'm looking at getting a price to ship them by sea, which should be cheaper, but not by much. Shipping by plane was only $700, everything else was fees and taxes. So if those fees stay the same, the shipping price won't go down by huge amounts.
Right now they're priced at $540 each If I recall. But there's really no way to sell them for that price because shipping would cost $1900. Obviously if we could get a decent number of smaller horns and waveguides packed in the empty areas of the pallet it would help.
But my guess is that you'd almost need to figure $800 for the 110hz tractrix. It's about 40" in diameter!
So if a pair or two of the 110's were ordered, it would seriously lower the number of items on the pallet, and the shipping would need to be divided out over less parts.
I'm looking at getting a price to ship them by sea, which should be cheaper, but not by much. Shipping by plane was only $700, everything else was fees and taxes. So if those fees stay the same, the shipping price won't go down by huge amounts.
Right now they're priced at $540 each If I recall. But there's really no way to sell them for that price because shipping would cost $1900. Obviously if we could get a decent number of smaller horns and waveguides packed in the empty areas of the pallet it would help.
But my guess is that you'd almost need to figure $800 for the 110hz tractrix. It's about 40" in diameter!
Has anyone tried the Beyma TPL-150 in the Gamt90 yet?
Hi,
I would just very much like to know if anyone has tried the Beyma TPL-150 in the Gamt90 waveguide? I am very interested in hearing how far in frequency the Beyma will load in the Gamt90 waveguide.
Further, what is the approximate horizontal dispersion of the Gamt90 waveguide in the 750-850 Hz range? I know there exists graphs for the Gamt90 loaded with the Harwood Acoustics AM35 driver, but would be very pleased if someone would 'translate' the graphs into a specific dispersion angle.
Thanks a lot!
Best regards
Peter
Hi,
I would just very much like to know if anyone has tried the Beyma TPL-150 in the Gamt90 waveguide? I am very interested in hearing how far in frequency the Beyma will load in the Gamt90 waveguide.
Further, what is the approximate horizontal dispersion of the Gamt90 waveguide in the 750-850 Hz range? I know there exists graphs for the Gamt90 loaded with the Harwood Acoustics AM35 driver, but would be very pleased if someone would 'translate' the graphs into a specific dispersion angle.
Thanks a lot!
Best regards
Peter
Hi Jacek,
Thanks a lot for your reply. Do I read the graph correctly, if it shows that horizontal is app. 80° at 800 Hz?
In case anyone has tried using the Beyma TPL-150 on the Gamt90 horn, I would very much like to know!
Thanks!
Best regards
Peter
Thanks a lot for your reply. Do I read the graph correctly, if it shows that horizontal is app. 80° at 800 Hz?
In case anyone has tried using the Beyma TPL-150 on the Gamt90 horn, I would very much like to know!
Thanks!
Best regards
Peter
I have AM35 which is "home" version of TPL150. Very natural sounding but limited vertical dispersion, highly recommended. Haven't used with a horn. GAMT90 at 800Hz below. For good dispersion use JMLC-1000 with LCY ribbon.
In the meantime some music from Poland.
USA & Poland, Marcus Miller & Leszek Mozdzer plays Komeda (Jazz Avantgarde 50s)
Marcus+ Leszek Mozdzer - Rosemary's Baby - YouTube
Multimedia version with Zohar Fresco:
Tu.Warszawa.2011-Leszek Mozdzer. & michael colombier w utworze -EMMANUEL - YouTube!
http://www.youtube.com/watch?feature=fvwp&v=MNmB5eHdt30&NR=1
Angie Stone:
Angie Stone - Wish I Didnt Miss You (Live in Warsaw) - Koncert Tu Warszawa - YouTube
Angie Stone - In My Garden / W moim ogrodzie ( Live in Warsaw ) - YouTube
(DAAB cover)
Zombie:
Dolores O'Riordan & Sinfonia Varsovia - Zombie ( Live in Warsaw ) - YouTube
Eris Is My Homegirl (a young band):
Eris Is My Homegirl - (Fina?) Must Be The Music - YouTube
The War of the Worlds (Losowski):
Walka Swiatow - YouTube
Tomek Losowski - STAR WARS Drum Solo!!! - YouTube
Losowski - Bez ograniczen energii - YouTube
Slawomir Losowski - Nowe narodziny (HD) - YouTube
Ballroom:
Taniec z Gwiazdami. Mistrzowski taniec Joanny Leunis i Michala Malitowskiego - YouTube!
USA & Poland, Marcus Miller & Leszek Mozdzer plays Komeda (Jazz Avantgarde 50s)
Marcus+ Leszek Mozdzer - Rosemary's Baby - YouTube
Multimedia version with Zohar Fresco:
Tu.Warszawa.2011-Leszek Mozdzer. & michael colombier w utworze -EMMANUEL - YouTube!
http://www.youtube.com/watch?feature=fvwp&v=MNmB5eHdt30&NR=1
Angie Stone:
Angie Stone - Wish I Didnt Miss You (Live in Warsaw) - Koncert Tu Warszawa - YouTube
Angie Stone - In My Garden / W moim ogrodzie ( Live in Warsaw ) - YouTube
(DAAB cover)
Zombie:
Dolores O'Riordan & Sinfonia Varsovia - Zombie ( Live in Warsaw ) - YouTube
Eris Is My Homegirl (a young band):
Eris Is My Homegirl - (Fina?) Must Be The Music - YouTube
The War of the Worlds (Losowski):
Walka Swiatow - YouTube
Tomek Losowski - STAR WARS Drum Solo!!! - YouTube
Losowski - Bez ograniczen energii - YouTube
Slawomir Losowski - Nowe narodziny (HD) - YouTube
Ballroom:
Taniec z Gwiazdami. Mistrzowski taniec Joanny Leunis i Michala Malitowskiego - YouTube!
Last edited:
Hi Jzagaja,
Thanks for the clarification - I missed that on the graph, sorry!
Best regards
Peter
Thanks for the clarification - I missed that on the graph, sorry!
Best regards
Peter
As you can read from graph it's 139.7 deg. Below Eminence Beta 8 in JMLC-200 adjusted with Behringer.
Mummy accepts all 12". Beyma 12BR100 is highly recomended because of very low distortion probably lowest avaiable.
Last edited:
If anyone here has bought the mummies could you PM me a bit about how you like them and what 12" you used. I am thinking either buying them or using the oswg-12 and building my own box. I like the mummy due to the fact that I am sure it's shape will have lower diffraction then anything I would be building.
I can get the 12br70 locally but I would have to track down the 12br100. The 12BR100 looks like an amazing driver.
- Home
- Group Buys
- Waveguides and horns