Older versions are still available as bare boards and crystals, no finished oscillators.
Hello Andrea,
please PM me with more details.
I am interested to learn&play first with these older versions, to warm up, to skill up, to familiarize on details and get more refined on issues... while in parallel I am interested for the new versions too.
For new versions of your source and doubler, do your see the date when a GB will be launched?
Thanks,
Ionmw
Hello Andrea,
please PM me with more details.
I am interested to learn&play first with these older versions, to warm up, to skill up, to familiarize on details and get more refined on issues... while in parallel I am interested for the new versions too.
For new versions of your source and doubler, do your see the date when a GB will be launched?
Thanks,
Ionmw
You can find detailed schematics and BOM for all the older oscillators in post #1506.
The new GB will start next month.
Hi Andrea,You can find detailed schematics and BOM for all the older oscillators in post #1506.
The new GB will start next month.
Thanks for info about next GB and the pin-point place for all previous schematics and BOM.
I reacted also for your tip "Older versions are still available as bare boards and crystals". I assumed that a question like where to buy these old pieces (=free of old budget investments for you, and help to learn for me before next GB = win-win) it does not hurt. You can PM me if you have old units or excess BOM for resale and hence make more budget available for future cool developments.
Thanks,
Last edited:
Hi Andrea,
Thanks for info about next GB and the pin-point place for all previous schematics and BOM.
I reacted also for your tip "Older versions are still available as bare boards and crystals". I assumed that a question like where to buy these old pieces (=free of old budget investments for you, and help to learn for me before next GB = win-win) it does not hurt. You can PM me if you have old units or excess BOM for resale and hence make more budget available for future cool developments.
Thanks,
I have no crystals in stock, some bare board only, so I think you have to wait for the next GB (coming soon). Also for the older versions, since I don't stock crystals.
Are they from Laptech (GB from this thread)? PM me with more details please.I have a new pair of 45/49M H43 SC cut, stock dated back Jul 2018.
Thanks,
I have no crystals in stock, some bare board only, so I think you have to wait for the next GB (coming soon). Also for the older versions, since I don't stock crystals.
Please could you let me know wich versions are available?
Please could you let me know wich versions are available?
All the older versions, no crystal for them.
I'm looking to buy 2nd hand crystals but I want to know if It can be used with the Chronus?
https://www.diyaudio.com/forums/swap-meet/353202-fs-laptech-crystal-tempered-master-clock-project.html#post6186999
Laptech crystals
https://www.diyaudio.com/forums/swap-meet/353202-fs-laptech-crystal-tempered-master-clock-project.html#post6186999
Laptech crystals
I'm looking to buy 2nd hand crystals but I want to know if It can be used with the Chronus?
https://www.diyaudio.com/forums/swap-meet/353202-fs-laptech-crystal-tempered-master-clock-project.html#post6186999
Laptech crystals
It seems that Chronus supports 45/49 MHz oscillator, from Twisted Pear Audio:
Cronus Re-clocking Module with 45.1584/49.152MHz Rhea Pair
Cronus Reclocking
im running 45/49 xos with cronus.I'm looking to buy 2nd hand crystals but I want to know if It can be used with the Chronus?
https://www.diyaudio.com/forums/swa...empered-master-clock-project.html#post6186999
Laptech crystals
It seems that Chronus supports 45/49 MHz oscillator, from Twisted Pear Audio:
Cronus Re-clocking Module with 45.1584/49.152MHz Rhea Pair
Cronus Reclocking
So these not supported for Chronus?
1. 90.3168MHz SC cut 5th overtone
2. 98.304MHz SC cut 5th overtone
If I remember well miero said in one post Chronus can support till 100mHz but I'm not sure.
i was using an older version of master clock board.So these not supported for Chronus?
1. 90.3168MHz SC cut 5th overtone
2. 98.304MHz SC cut 5th overtone
If I remember well miero said in one post Chronus can support till 100mHz but I'm not sure.
keep in mind though, there are several versions of cronus too. i believe older versions dont support high freq clocks.
But not needed high frequency clocks for DSD512, I guess is enough with 45 & 49 & less jitter?
Mine is version 1.4 I guess is new?
I think 1.4 should work with higher freq XOs.
What frustrates me is how poorly twistedpears are with their docs.
On the other hand, I shelved master clock board for 2 years. Came back to it, build it according to the docs. It works perfectly.
Thanks Andrea
It seems that Chronus supports 45/49 MHz oscillator, from Twisted Pear Audio:
Cronus Re-clocking Module with 45.1584/49.152MHz Rhea Pair
Cronus Reclocking
Can I use yours 45/49 MHz oscillators togheter the Chronus?
Are 3.3V CMOS type clocks with ~50% duty cycle as twisted pear Chronus needs?
I think 1.4 should work with higher freq XOs.
What frustrates me is how poorly twistedpears are with their docs.
On the other hand, I shelved master clock board for 2 years. Came back to it, build it according to the docs. It works perfectly.
Thanks Andrea
Yes TP docs are inexistent😡
- Status
- Not open for further replies.
- Home
- Source & Line
- Digital Line Level
- The Well Tempered Master Clock - Building a low phase noise/jitter crystal oscillator