ml48 - UKgary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
I should have said "enough for 5-8 stereo amplifiers".I guess they each want 2 amplifiers, so enough for 4 subscribers ?
Enjoy your matching. 🤓
Best,
Patrick
Yes. In fact, my preference would be to only share the Gerbers and let everyone else fabricate their PCBs and obtain and match their own FETs. But, that is not practical since the FETs are becoming unobtainium.Will you still share the Gerbers so builders not on the list will be able to play in the sandbox?
I am still finalizing the revised PCB layout. Once complete, I will have a set of 4 PCBs fabricated. After successfully bench testing the new boards, I will have a big batch fabricated and will make the Gerbers available.
I will need to acquire, measure, and pair a lot of FETs. The list currently requires 48 pairs of FETs, which might require
acquiring, measuring, and matching as many as 250 each of the NFETs and PFETs. Are there any volunteers to help?
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
Are there any volunteers to help?
Group matching never worked for me in the past.
My 2 cents,
Patrick
.
I would be quite happy to use a set of Gerbers to fab my own PCBs and match the FETs. There are a couple alternate device pairings that I want to try, as I have mentioned already in this thread.
I will certainly report back with my findings.
I will certainly report back with my findings.
Thank you Ihquam for you hard work. i am fine with gerbers too and i use my own MOSFET´s.
Great that TA did some successful test with available parts ! 👍
chris
Great that TA did some successful test with available parts ! 👍
chris
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
Based on what the member Mr Quam has said in post #143, I would suggest that members currently on the list, remove their names if they are happy to get the gerber files and make their own boards and supply their own fets.
This will make it clearer as to how many Fets might have to be purchased. I also think it is only fair that the final price of the matched Fet pairs reflects a reasonable price to allow for the members costs in buying more than required and time matching and sorting them.
I will stay on the list to take advantage of the offer, thanks.
I would volunteer to help but too far away. Surely there would be another member there in the US to put up their hand.
This will make it clearer as to how many Fets might have to be purchased. I also think it is only fair that the final price of the matched Fet pairs reflects a reasonable price to allow for the members costs in buying more than required and time matching and sorting them.
I will stay on the list to take advantage of the offer, thanks.
I would volunteer to help but too far away. Surely there would be another member there in the US to put up their hand.
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
Anything named “Holy Grail” ought to be worth a try… 🙂
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
30 subscriber is 120 matched devices.
50% yield means 240 devices to match.
5 minutes each for measurement, another 5 for sorting and packing.
That is 8 hours non-stop.
Plus another hour to select the quads from an excel sheet.
Another hour to post and send notifications.
That is a total of 10 hours.
How deep is your love (for DIY) !!!!!!
Best regards, 🙂
Patrick
(Just sharing my experience)
50% yield means 240 devices to match.
5 minutes each for measurement, another 5 for sorting and packing.
That is 8 hours non-stop.
Plus another hour to select the quads from an excel sheet.
Another hour to post and send notifications.
That is a total of 10 hours.
How deep is your love (for DIY) !!!!!!

Best regards, 🙂
Patrick
(Just sharing my experience)
Just adding ml48 to the list as it seems it didn't add.
I would be interested in gerbers.
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
I would be interested in gerbers.
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
chermann - Austria
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
i am out, just gerber
thanks
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
Arthur-HK
william2001 - USA
jostwid - Switzerland
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
i am out, just gerber
thanks
Last edited:
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
Arthur-HK
william2001 - USA
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
i am out, just gerber
thanks
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
Arthur-HK
william2001 - USA
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
Ra7 - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
i am out, just gerber
thanks
Taking myself out. Just the gerbers, please. Thanks!
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
Arthur-HK
william2001 - USA
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
gary s - Australia
dBel84 - USA
yoaudio - USA
EIArte - USA
kannan_s - USA
von Ah - USA
tom1066 - USA
ACnotDC - Germany
Arthur-HK
william2001 - USA
ItsAllInMyHead - USA
Integra - Canada
Sonnenschein - Germany
birdbox - USA
eriksson-Sweden
Asanden - The Netherlands
manniraj - USA
Robert8 - USA
mordikai - USA
lucadvt - Italy
aud1out - Canada
brimax - Italy
E_Fortier - Canada
CodyT - USA
ml48 - UK
- Home
- Amplifiers
- Pass Labs
- The Holy Grail Follower Output Stage