I love the look of these, glad to hear somebody else is enjoying the 7ms as I've not seen much posted about them
I just started a similar swap, but there will be some issues fitting the A7ms in the A7.3 cutout. I will make it work.
dave
A11MS XL my way
I can see that everyone likes SF Stradivari design, Troels does (PMS), member Stal does and myself too. So this is my version of that design (plagiarism does not sound nice). It is designed somewhere between MLTL an BR (or some combo of those two ..), anyway, these loudspeakers are going to stay in my setup for next very long period if not my final loudspeakers.
I am too much satisfied with sound and appearance and WAF is very high. It is driven with T-amp as I am not satisfied with EL156 SE that is in my possession at the moment
I can see that everyone likes SF Stradivari design, Troels does (PMS), member Stal does and myself too. So this is my version of that design (plagiarism does not sound nice). It is designed somewhere between MLTL an BR (or some combo of those two ..), anyway, these loudspeakers are going to stay in my setup for next very long period if not my final loudspeakers.
I am too much satisfied with sound and appearance and WAF is very high. It is driven with T-amp as I am not satisfied with EL156 SE that is in my possession at the moment
Attachments
zmajz,
That's a good looking build there - well done!
You were inspired by the SF Stradivari, and I guess SF must have been inspired by someone else? 🙂
Also good to know that WAF is high, and most importantly the sound is enjoyable.
That's a good looking build there - well done!
You were inspired by the SF Stradivari, and I guess SF must have been inspired by someone else? 🙂
Also good to know that WAF is high, and most importantly the sound is enjoyable.
It's almost three months that these speakers are in constant use and I must say that on the wide front baffle these drivers are sounding much better than in narrow one. Tried them in narrow and smaller boxes but this is much better.
Yes, they do sound bigger and more voluminous sound.
Plans are done by hand and in situ during production, but in a day or two I can put some here as plans are not with me at the moment
Yes, they do sound bigger and more voluminous sound.
Plans are done by hand and in situ during production, but in a day or two I can put some here as plans are not with me at the moment
Last edited:
Thanx! I had them in a wife baffle as well, but also with more internall volume. Sounded bigger than the nostromo's. Very interesting!
I guess me too. Ours were inspired by Ellispam we did sort of steal the name too,
You have built very nice boxes.
P10-hifi Alpair 7.3eN + SDX7eN WAW (aka FAST)
The Alpair 7eN have come out and A7mSeN will go in.
dave
with the amount of kids toys in the pic I would say 100 percent! Just from my own experience..... 🙂
I just put together a kjf kit - very near the same as your - with the 11ms. Only a few hours on them... but at the moment I feel like im hoping for a miracle that the low end appears... I play an 80hz tone and it's not very audible.... I guess I target a good 30 hours or more before I get back to judging this.
I'm keenly catching up on your posts, logic800. I have mine powered by the new hypex ncx500. About 380w 8ohms... so I will break them in and then connect up my PP el34 18w 8ohm for that warmth.
