• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

My_Ref Fremen Edition GB (eight run - v1.6 boards)

Status
Not open for further replies.
Jump to Latest
#64
I've updated the Google spreadsheet with remboursement info.

You will find green cells where remboursement has been completed or it was not due since the partecipant has been already billed with final prices.

All remboursements to partecipants without the SMD option are complete, for the others I'm waiting to finalize the exact number of SMD parts that will be replaced by through hole parts.
 
#65
Update

Boards are still in production, hopefully they will be in my hands by the end of next week.

I'm still evaluating through hole signal and power supply resistors, It's more difficult than I thought initially, so remboursement for partecipants wih SMD option is still on hold, sorry.

I'm receiving late requests but all the extra boards are gone.

Too late partecipants can book for the next GB here:

https://docs.google.com/spreadsheets/d/1_vZGdFkfBqiE12P9HVT-Ihi9LmAi0j6pnKc8brq8ZQI/edit?usp=sharing

Immediate PM with PayPal info is requested.
 
#66
Please wait ordering the BOM

As I've already wrote, please wait before ordering the BOM, it's under revision.

If someone already did it, don't worry, the previous BOM is still valid and great sounding.

But for the rest, just wait, the revised one will be even better and ordering now gives no advantage since Mouser ships in 2/3 days max.
 
#67
ClaveFremen said:
Boards are still in production, hopefully they will be in my hands by the end of next week.

I'm still evaluating through hole signal and power supply resistors, It's more difficult than I thought initially, so remboursement for partecipants wih SMD option is still on hold, sorry.

I'm receiving late requests but all the extra boards are gone.

Too late partecipants can book for the next GB here:

https://docs.google.com/spreadsheets/d/1_vZGdFkfBqiE12P9HVT-Ihi9LmAi0j6pnKc8brq8ZQI/edit?usp=sharing

Immediate PM with PayPal info is requested.
Click to expand...

Hello Dario, when will the next GB be ordered? Thanks.
 
#70
Boards arrived!

Next week all bare boards will be shipped and the next again all the rest. 🙂

attachment.php
 

Attachments

  • IMG_2692.jpg
    IMG_2692.jpg
    375 KB · Views: 532
#76
Bare boards shipped!

All bare boards have been shipped today 🙂

Well, all but 2 kits that will be collected directly by partecipants... 😉

Next saturday it's boards with SMD option turn.

Tracking info is available, in case of long delay or other problems PM me to have the tracking number.
 
#78
BOM revision status

If someone followed BOM revision, in these last days several parts have been tested and replaced others, sometimes they changed again.

I should be able to release the BOM by this Sunday, thanks to everyone for patience.

One note about the new PCBs, there is a small glitch for who will use Z-Foil resistors in place of normal 0207 or SMD ones.

The pads have been sized for Vishay VAR so 3.91mm lead spacing according the datasheet I've downloaded from Parts Connexion site but Z-Foils sold by HiFi Collective (Charcroft) have a more standard 5mm lead spacing.

Those Z-Foils can be mounted without problem bending a bit leads or using 0207 pads.

I would ask to partecipants that will buy VARs from Parts Connexion to confirm the lead spacing.
 
Status
Not open for further replies.
Top Bottom