hello outa germany,
is there any chance to get a bulb working in my projector
sharp xr 10s ?
it must be shp 275 watt as i've seen in the prospect.
greets
holger
is there any chance to get a bulb working in my projector
sharp xr 10s ?
it must be shp 275 watt as i've seen in the prospect.
greets
holger
Hi YWH
Greeting to China, I also need bulb for
Hitachi cp-s318
Bulb wattage 150
printed on bulb :
HSCR150H6H
(Hq)
Reply if u need more info. I am from Czech republic (Europe)
Inform me about price and delivery time.
Thanks and regards
DJX
Greeting to China, I also need bulb for
Hitachi cp-s318
Bulb wattage 150
printed on bulb :
HSCR150H6H
(Hq)
Reply if u need more info. I am from Czech republic (Europe)
Inform me about price and delivery time.
Thanks and regards
DJX
What would the replacement bulb be for a proxima x350 Lamp-027. I think so far its a jyd 120w DC. Could that be correct?
Thanks for all the help everyone!
Thanks for all the help everyone!
Hello YWH,
I received the $100 SHP retrofit lamp for the Mitsubishi LVP-X70UX and had it running without any problem; the view was bright and colors were very good.
Unfortunately after 4 days and ~20 hours the lamp quit in the middle of a show. It is now very cloudy inside the bulb.
The projector tries to fire it up but it fails to ignite. This one has turned out to be the lamp with the least number of hours of operation so far.
Do you have a separate ballast for these SHP lamps?
I received the $100 SHP retrofit lamp for the Mitsubishi LVP-X70UX and had it running without any problem; the view was bright and colors were very good.
Unfortunately after 4 days and ~20 hours the lamp quit in the middle of a show. It is now very cloudy inside the bulb.
The projector tries to fire it up but it fails to ignite. This one has turned out to be the lamp with the least number of hours of operation so far.
Do you have a separate ballast for these SHP lamps?
Hello FRIDAY !
what is the cloudy inside the bulb? do you have some pics?
ONE MELTED ELECTRODE? or BURNED INTERNAL CONNECTION TO ONE ELECTRODE?
or do you have the pic of your ballast? I can found 150w ballast for these SHP lamps, but may be it is not same as yours.
you can send back the shp bulb to me and I send back bulb money to you.
or I can give you my 150w JYD/AC and the ballast, free.
or I can give you my 3 JYs400/AC (3M MP8610) to you, free
some inf
http://www.diyaudio.com/forums/showthread/t-64666.html
Hi AudioGear944
yuweihua@163.net is the best way to contact me.
Hi rihana
http://www.projectorcentral.com/Sharp_PG_Series-XR-10S.htm
is your lamp SHP? IF YES:
you can buy 270w JYS/DC, $40,each, shipping is $5
Hi DJXixao
you need 150w JYS/DC, $40,each, shipping is $5
Hi piboy
you need 150w JYD/AC, $60,each, shipping is $5
http://www.projectorcentral.com/Proxima-UltraLight_X350.htm
what is the cloudy inside the bulb? do you have some pics?
ONE MELTED ELECTRODE? or BURNED INTERNAL CONNECTION TO ONE ELECTRODE?
or do you have the pic of your ballast? I can found 150w ballast for these SHP lamps, but may be it is not same as yours.
you can send back the shp bulb to me and I send back bulb money to you.
or I can give you my 150w JYD/AC and the ballast, free.
or I can give you my 3 JYs400/AC (3M MP8610) to you, free
some inf
http://www.diyaudio.com/forums/showthread/t-64666.html
Hi AudioGear944
yuweihua@163.net is the best way to contact me.
Hi rihana
http://www.projectorcentral.com/Sharp_PG_Series-XR-10S.htm
is your lamp SHP? IF YES:
you can buy 270w JYS/DC, $40,each, shipping is $5
Hi DJXixao
you need 150w JYS/DC, $40,each, shipping is $5
Hi piboy
you need 150w JYD/AC, $60,each, shipping is $5
http://www.projectorcentral.com/Proxima-UltraLight_X350.htm
Hi YWH!
Thanks for your answer!
It's really MP610:
http://www.projectorcentral.com/BenQ-MP610.htm
Do you know this?
The lamp is also 200w but I can't find the type.
About the Epson ELP-3000, I will find out if the lamp is AC or DC following your instructions in past posts.
Thanks in advance,
Ri7
Thanks for your answer!
It's really MP610:
http://www.projectorcentral.com/BenQ-MP610.htm
Do you know this?
The lamp is also 200w but I can't find the type.
About the Epson ELP-3000, I will find out if the lamp is AC or DC following your instructions in past posts.
Thanks in advance,
Ri7
Hi Ri7
Epson ELP-3000:150W Metal Halide,it need JYS, but I dont know AC or DC
is it Benq MP6100, MP6100 need 200W JYS/DC,$40 each, shipping is $5
Hi YWH, thanx for fast reply, i will buy 2 pieces of JYS150W/DC from you. How can I send money to you ? paypal ? bank transfer ? and where to send shipping address details ?
Regards
DJx
Regards
DJx
Hi YWH,
Thanks for your offer and the link to the discussion on the LVP-X70UX projector. I used the original ballast in the projector. All the electrodes and connections appear OK with this lamp. In the pic you can only see one electrode because the bulb is cloudy inside.
I will mail it back to you as soon as I get your shipping address.
I would be interested in the 150w JYD/AC and ballast that way I will not have to deal with the internal ballast again.
ywh said:Hello FRIDAY !
what is the cloudy inside the bulb? do you have some pics?
ONE MELTED ELECTRODE? or BURNED INTERNAL CONNECTION TO ONE ELECTRODE?
or do you have the pic of your ballast? I can found 150w ballast for these SHP lamps, but may be it is not same as yours.
you can send back the shp bulb to me and I send back bulb money to you.
or I can give you my 150w JYD/AC and the ballast, free.
or I can give you my 3 JYs400/AC (3M MP8610) to you, free
Thanks for your offer and the link to the discussion on the LVP-X70UX projector. I used the original ballast in the projector. All the electrodes and connections appear OK with this lamp. In the pic you can only see one electrode because the bulb is cloudy inside.
I will mail it back to you as soon as I get your shipping address.
I would be interested in the 150w JYD/AC and ballast that way I will not have to deal with the internal ballast again.
Attachments
Hi FRIDAY!
I know what happen, this bulb is not SHP!
you sent about $65 for JYD/DC first, and then sent about $35 for SHP again. but I sent JYD/DC before you sent about $35. so you receive JYD/DC .
I will contact 18, I will send to you a sure SHP if he has not sent bake $35. to you
I have never lost belive in my SHP ;-)
Hi Ri7!
can you pull out you bulb to take a pic? I have to know DC or AC.
I know what happen, this bulb is not SHP!
you sent about $65 for JYD/DC first, and then sent about $35 for SHP again. but I sent JYD/DC before you sent about $35. so you receive JYD/DC .
I will contact 18, I will send to you a sure SHP if he has not sent bake $35. to you
I have never lost belive in my SHP ;-)
Hi Ri7!
can you pull out you bulb to take a pic? I have to know DC or AC.
Ywh,
Thanks for the help! I would like to buy one. Do we do it on 18 wheelers website? How do i need to do this? Thanks for your time!!
piboy
Thanks for the help! I would like to buy one. Do we do it on 18 wheelers website? How do i need to do this? Thanks for your time!!
piboy
YWH,
I disassembled the LVP-X70UX projectors and found that they are both using a Hitachi PS-212 -LC2-170 ballast.
I disassembled the LVP-X70UX projectors and found that they are both using a Hitachi PS-212 -LC2-170 ballast.
3M MP8030
Hi YWH, it is possible to provide a bulb that will work with a 3M MP8030 ? if so what do I need and how much is it?!
Much Appreciated
Tom
Hi YWH, it is possible to provide a bulb that will work with a 3M MP8030 ? if so what do I need and how much is it?!
Much Appreciated
Tom
Hi YWH, I have a Sharp XG-C40XE which uses NSH 200W DC bulb, is it safe to replace this with 180W SHP? how long will the SHP last?
hello newbie here
Hello im new here and im looking for a bulb for an older eiki projector model lc300.
The model for the bulb is 610 2607208.
It is a 160w mh bulb.
I have looked for it on this site but i cant find any reference to it.
Thank you.
Hello im new here and im looking for a bulb for an older eiki projector model lc300.
The model for the bulb is 610 2607208.
It is a 160w mh bulb.
I have looked for it on this site but i cant find any reference to it.
Thank you.
- Status
- Not open for further replies.
- Home
- General Interest
- Everything Else
- The Moving Image
- DIY Projectors
- I got my new lamp. It is for commercial projection use. people use it to replace the