mrriso,
It takes a while for it to go through 18 Wheeler if that's the route you took.
I think YWH is 13 hours ahead of Eastern Standard Time, at least that's what I figured the other day when I was checking world time .
All the Best!
It takes a while for it to go through 18 Wheeler if that's the route you took.
I think YWH is 13 hours ahead of Eastern Standard Time, at least that's what I figured the other day when I was checking world time .
All the Best!
Hi!
I have read to all the pages
I am in order to buy a sanyo plv z2,
bulb is 130W UHP http://www.cvsmedia.co.uk/shop/product_info.php?cPath=23_95&products_id=1350
then a Jyd 150W????
Tanks for reply🙂
I have read to all the pages
I am in order to buy a sanyo plv z2,
bulb is 130W UHP http://www.cvsmedia.co.uk/shop/product_info.php?cPath=23_95&products_id=1350
then a Jyd 150W????
Tanks for reply🙂
Info on Epson PowrLite 52c
Hi all,
I was reading back on a post that BadBoy had posted, (http://www.diyaudio.com/forums/showthread.php?s=&threadid=59091&perpage=10&pagenumber=86
I have the same projector as he was working on which is an Epson 54c.
It has a 130 watt UHE lamp, and am pretty sure it's AC being the younger age (2003)
http://www.projectorcentral.com/Epson-PowerLite_52c.htm
I've had a few other questions on other projectors but being I'm new , can't directly e-mail members yet.( BTW how long does that take before I can?)
Anyway , BadBoy mentioned he was willing to experiment with a 200 watt JYD/AC lamp but there was no follow-up on success or not., this was in November and figured it would be enough time to find out whether it went "Pop Fizzzzz~~" or was a glowing success! ;o).
Anyone had contact with him on an update on success or know what bulb I can use in this projector or a possible improvement over the 130w UHE ?
Looking forward to a reply ;o)
Hi all,
I was reading back on a post that BadBoy had posted, (http://www.diyaudio.com/forums/showthread.php?s=&threadid=59091&perpage=10&pagenumber=86
I have the same projector as he was working on which is an Epson 54c.
It has a 130 watt UHE lamp, and am pretty sure it's AC being the younger age (2003)
http://www.projectorcentral.com/Epson-PowerLite_52c.htm
I've had a few other questions on other projectors but being I'm new , can't directly e-mail members yet.( BTW how long does that take before I can?)
Anyway , BadBoy mentioned he was willing to experiment with a 200 watt JYD/AC lamp but there was no follow-up on success or not., this was in November and figured it would be enough time to find out whether it went "Pop Fizzzzz~~" or was a glowing success! ;o).
Anyone had contact with him on an update on success or know what bulb I can use in this projector or a possible improvement over the 130w UHE ?
Looking forward to a reply ;o)
YWH
Got your message.
RE: Epson PowerLite 52c / Lamp > 130W UHE
I will look , check V for AC ~ DC .
Will send / post pics if needed.
Thanks
Got your message.
RE: Epson PowerLite 52c / Lamp > 130W UHE
I will look , check V for AC ~ DC .
Will send / post pics if needed.
Thanks
I have looked on web and cannot find the difference between the UHE and UHP
There are many references to them but found nothing to say they are different.
(UHE)=UHE=Ultra High Efficiency (some say Ultra- High Energy.)
(UHP)= Ultra- High Performance.
Color temperature may be a factor but couldn't find any real references.
I checked V on the Epson Powerlite 52c.
It was only 4.30 VAC which I think was because it was in stand by mode because of no lamp. Read nothing on VDC.
Epson 52c calls for 130w UHE
Will try the 150w JYD/AC when they come in.
Here's a pic of the Epson 52c lamp:
There are many references to them but found nothing to say they are different.
(UHE)=UHE=Ultra High Efficiency (some say Ultra- High Energy.)
(UHP)= Ultra- High Performance.
Color temperature may be a factor but couldn't find any real references.
I checked V on the Epson Powerlite 52c.
It was only 4.30 VAC which I think was because it was in stand by mode because of no lamp. Read nothing on VDC.
Epson 52c calls for 130w UHE
Will try the 150w JYD/AC when they come in.
Here's a pic of the Epson 52c lamp:
Hi Dumbfounded
the UHP is made in PHILIPS only.
the UHE is made in PHILIPS and PANASONIC,
and
why The PHILIPS cooperated with the PANASONIC in building the new UHE?
they are different I think!
you have risk
the UHP is made in PHILIPS only.
the UHE is made in PHILIPS and PANASONIC,
and
why The PHILIPS cooperated with the PANASONIC in building the new UHE?
they are different I think!
you have risk
Hi I Look for to projector bulb PROXIMA 5610. original then metal halide 250w : UMR 250 firm USHIO
http://www.donsbulbs.com/cgi-bin/r/b.pl/plc|lmp|12.html
I for help thank.
http://www.donsbulbs.com/cgi-bin/r/b.pl/plc|lmp|12.html
I for help thank.
Attachments
Hi tom.pk
http://www.ushio.co.jp/products/catalog/imp_e/1035.html
250W JYS/AC can replace your UMR 250 USHIO
yuweihua@163.net
http://www.ushio.co.jp/products/catalog/imp_e/1035.html
250W JYS/AC can replace your UMR 250 USHIO
yuweihua@163.net
replacement lamp for PROXIMA 5800
will this lamp replace the lamp for my proxima 5800 desktop projector, lamp model L120 i think. 260W, 40V.
will this lamp replace the lamp for my proxima 5800 desktop projector, lamp model L120 i think. 260W, 40V.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Yes!
It is a metal halide 260w , but do you know AC or DC?
if the electrode like this , one biger one smaller, it is DC,
if they are same size, it is AC
Attachments
how much?
how much would it cost and do i have to send my burned out lamp to you to install? and since i live in the US, i imagine it would be A/C... if this is not the case, how would i find out? thank you.
-Dan
how much would it cost and do i have to send my burned out lamp to you to install? and since i live in the US, i imagine it would be A/C... if this is not the case, how would i find out? thank you.
-Dan
sorry for all these little posts... but heres the picture of the lamp i have.
An externally hosted image should be here but it was not working when we last tested it.
Hi pfloydphan
$40 each shipping is $5.
you have to take a pic of your burned out lamp, close the bulb,like my pic, I need to see the electrode
your bulb is broken I think, dig the bulb out to take pic.
$40 each shipping is $5.
you have to take a pic of your burned out lamp, close the bulb,like my pic, I need to see the electrode
your bulb is broken I think, dig the bulb out to take pic.
- Status
- Not open for further replies.