Hey, ex007!
I have mailed you about the payment, but I didn't got anny answer!
Can you check your e-mail and reply how and how much i should pay!
Mvh: Tomas
I have mailed you about the payment, but I didn't got anny answer!
Can you check your e-mail and reply how and how much i should pay!
Mvh: Tomas
The major bulk of components are orderd and should be ariving at the end of this week or the begining of the next week. I'v alredy recived the wago connectors.
Looks like I missed this group by. Any hope of extra sets available or another round going through soon?
Mouser BOM
I just ordered from Mouser, posting the BOM so it may take you less time. Includes everything on the board except LM4780 and Heat Sink. I could not find 1% 2R2 and 4R7 resistors so subbed 5% for these. Parts price with some spares was ~$70 USD per board.
I just ordered from Mouser, posting the BOM so it may take you less time. Includes everything on the board except LM4780 and Heat Sink. I could not find 1% 2R2 and 4R7 resistors so subbed 5% for these. Parts price with some spares was ~$70 USD per board.
Thanks, Bob.
I was looking for such Bom at mouser.
The price in the Swedish group buy was ~43$ but it didn't include some of the components.
We need to compare those out to see what is the price difference.
Where do you get the heat sinks?
I was looking for such Bom at mouser.
The price in the Swedish group buy was ~43$ but it didn't include some of the components.
We need to compare those out to see what is the price difference.
Where do you get the heat sinks?
Re: Mouser BOM
Man, I wish someone had posted something like this earlier...but hopefully you can help out some people that didn't get in on the GB. Great job!
bobgroger said:
Man, I wish someone had posted something like this earlier...but hopefully you can help out some people that didn't get in on the GB. Great job!
I am not guaranteeing 100% accuracy with this but it was the best I could do in 1 hour with the online catalog. It is at least a starting point. Anyone know how to save a Mouser project for public access? Then you could have 1-click ordering.....
I got my heat sinks from ebay seller barrredboss in 4" lengths, 4 for ~$38 delivered. A little wider than the board but suits my needs. IF I am impressed I will beautify it later. Using 1 Antek 3225 toroid per board. Eventually plan 1 paralleled board per tri-amped channel, with 2 BPA300 boards for Bass.
Bob G.
I got my heat sinks from ebay seller barrredboss in 4" lengths, 4 for ~$38 delivered. A little wider than the board but suits my needs. IF I am impressed I will beautify it later. Using 1 Antek 3225 toroid per board. Eventually plan 1 paralleled board per tri-amped channel, with 2 BPA300 boards for Bass.
Bob G.
Too bad there are no group buys to the other components like the heat sinks, the PA and Piltron's toroids.
Plitron toroids GB?
BNK said:
If there is a consensus about what voltage is required, I'd be willing to work on a GB for Plitron toroids (since they, and I, are in Canada), assuming the price break was worth it. I have observed, though, that a number of posters think that Plitrons are overpriced, so I don't know how many people would be interested.
This thread suggests a discount of about 25% may be feasible. Post expressions of interest and if enough people want some, I'll approach Plitron for a price.
Regards.
Aengus
BNK said:
If there is a consensus about what voltage is required, I'd be willing to work on a GB for Plitron toroids (since they, and I, are in Canada), assuming the price break was worth it. I have observed, though, that a number of posters think that Plitrons are overpriced, so I don't know how many people would be interested.
This thread suggests a discount of about 25% may be feasible. Post expressions of interest and if enough people want some, I'll approach Plitron for a price.
Regards.
Aengus
I'm not too concerned about the heatsinks, but if there were decent savings on Plitron transformers, I would definitely be interested, especially since I have 2 to build.
Mouser BOM correction
Got my package today. On first look everything looks OK bur I need something better for the 2.2 and 4.7 ohm resistors, and the fuseholders I ordered are covers only. The speaker relays are only 8 Amp but I think they will work with contacts paralleled. Now I need to order $.40 worth of fuse clips 🙁
Just FYI.....
Bob G.
Got my package today. On first look everything looks OK bur I need something better for the 2.2 and 4.7 ohm resistors, and the fuseholders I ordered are covers only. The speaker relays are only 8 Amp but I think they will work with contacts paralleled. Now I need to order $.40 worth of fuse clips 🙁
Just FYI.....
Bob G.
Hi Bob,
pin spacing for fuseholders are universal - you can use also miniature 2/10" radial type...
Cheers,
Pavel
pin spacing for fuseholders are universal - you can use also miniature 2/10" radial type...
Cheers,
Pavel
I'm spending long houers packing the sets right now, there are still some relays missing sins my supplier was out of stock but they are on the way they assure me.
Excellent!
ex007,
Thanks for the update and even bigger thanks for all your hard work. It's people like you that make diyAudio such a great place! Thanks again!
-claiborne
ex007,
Thanks for the update and even bigger thanks for all your hard work. It's people like you that make diyAudio such a great place! Thanks again!
-claiborne
This is by far more timeconsuming than I anticipated, I'v orderd components in hundreds and I'v packed 60 packages with components. It is a real agony when I got one BC556 left and have to recheck all pagages and when my suplier sends 7 piecs short of the BC140!.... I also got 5 leftover resistors with different values either there is missing resistors in packages or I got extra.
Well if anything is missing I'll have to send replacement parts.
Well the major bulk of the packages is finnished now I just have to put the resistor bag, chip bag and the big bag in an envelope and hopefully I can pack and send everythin this week (like I had a life anyway).
Well if anything is missing I'll have to send replacement parts.
Well the major bulk of the packages is finnished now I just have to put the resistor bag, chip bag and the big bag in an envelope and hopefully I can pack and send everythin this week (like I had a life anyway).
ex007 said:
Hi ex007
I did try - admittedly somewhat obliquely - to warn you somewhere way back in this thread 😱
But what could be a better life than service to your fellow DIYers?
For what it's worth, we recognize the magnitude of the task you've taken on and - as claiborne and others have noted - we really do appreciate it. Thank you again.
Regards.
Aengus
Hi ex007
I did try - admittedly somewhat obliquely - to warn you somewhere way back in this thread 😱
But what could be a better life than service to your fellow DIYers?
For what it's worth, we recognize the magnitude of the task you've taken on and - as claiborne and others have noted - we really do appreciate it. Thank you again.
Regards.
Aengus
- Status
- Not open for further replies.