• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Bruno Putzeys Preampli - GB for the 6 Input Board

Status
Not open for further replies.
Jump to Latest
#81
Uhh??? I missed this GB and only 10 days from start of thread to finish - amazing effiency! That will teach me to only look at subscribed to threads ...

Do you have any SMD soldered boards and selectors left I might be able to purchase please Enrico? Just one set would do .

(I do already have your original board Enrico... still not got around to learning to SMD solder yet.)
 
#82
NATDBERG said:
Uhh??? I missed this GB and only 10 days from start of thread to finish - amazing effiency! That will teach me to only look at subscribed to threads ...

Do you have any SMD soldered boards and selectors left I might be able to purchase please Enrico? Just one set would do .

(I do already have your original board Enrico... still not got around to learning to SMD solder yet.)
Click to expand...

Hi Nat,

You are right, this was a very fast GB... I still have the parts for 2 boards, so no problem.

Best Regards,
Enrico
 
#85
emyeuoi said:
You mean the 6 input board only with the SMD only? Yes of course 🙂
Click to expand...

Err.... the board with the SMD bits on and the board with the rotary switch on it. Is that the same as you said? 🙂

1 x
537973d1458204060-bruno-putzeys-preampli-gb-6-input-board-dsc02719.jpg
 
#86
NATDBERG said:
Err.... the board with the SMD bits on and the board with the rotary switch on it. Is that the same as you said? 🙂

1 x
537973d1458204060-bruno-putzeys-preampli-gb-6-input-board-dsc02719.jpg
Click to expand...

Nat, I can give you the board for selector and the board for the 6 inputs with all the SMD parts installed. About the other parts through holes, I am sorry but I don't have them available... you have to buy and solder by yourself.
Sorry about that.

Regards,
Enrico
 
#100
drpro said:
Enrico if you have any more boards, with or without parts. I would be happy to purchase one.

Regards,
David
Click to expand...

Hi David,

I still have one board with parts. It's the last one, with a small defect in the PCB that I didn't noticed when I build the board... As you can see it's just a corner but it's better you know.

And I have still few bare boards...

Regards,
Enrico
 

Attachments

  • DSC02751.jpg
    DSC02751.jpg
    489.9 KB · Views: 152
Status
Not open for further replies.
Top Bottom