Do you know of any others who manufacture speaker elements that have been tested and individually fitted as a pair?
The pairs of drivers i sold were even better matched than the MAOPs.
Not much left now.
dave
great im thinking the same to take another pair! i want 4 pcs in the system 2+2 , 70w for great discoI bought the second to last pair from SoundImports. $300.18 for a pair delivered in 2 days to the US. Such a deal!
The pairs of drivers i sold were even better matched than the MAOPs.
Not much left now.
dave
Sorry I missed that.
Maop have a correct sound.
First one for me.
Leif
I have been listening for a couple of days after my holiday and I must say I really like them. They (MAOP11.2) are improving more than I expected. It takes getting used to after listening to my rather large horn speakers, as it is so different. But it is very enjoyable and no listening fatigue to speak of!
(I did adjust the port to the right length, at least by my ears)
(I did adjust the port to the right length, at least by my ears)
Maop have a correct sound.
Likely less the matching than the large number of electrons used to bombard the Al-alloy cone to turn the surface into a VERY thin ceramic.
Given the very high rejection rate of the cones, each driver has to be tested and why not at least do cursory matching if you have the data.
MA matches Fs. I used a metric based on up to 10 of the driver parameters (these averages below ∓3% and sensitivity withing 0.25dB).
I still have a few pairs. Nothing s exotic as M10.2, but also a wholelot less pricey, given where i am, bargins vbecause everything needs to go.
dave
Now it seems that there are not many pairs of Alpair Maop left here in the eu.
11 Maop seems to be over.
Some pairs of 10Maop in France remain.
Fullrange speaker MarkAudio MAOP 10.2 (WHITE), 8 ohm, 164.5 mm
11 Maop seems to be over.
Some pairs of 10Maop in France remain.
Fullrange speaker MarkAudio MAOP 10.2 (WHITE), 8 ohm, 164.5 mm
Last edited:
They are still there but disconnectedVery nice! Are the tweeters on top activated, or is it just there but disconnected?
I am enjoying them in these boxes until I pulled the trigger on a diy design (folded Water buffalo or tbd).
David between the Goliaths
I just finished the built of the cabinets for the MAOP11.2 last weekend.
Now they're playing and they sound very good.
The bass on the cabinets turned out very good, a big plus for these SDDBH-T15.5R-AD cabinets is that you can tune the horn mouths with moveable ports.
Since there is no crossover to tweak, you do have the ports
Also some experimentation with damping materials in the chamber behind the driver needs be done.
So far I like them
I just finished the built of the cabinets for the MAOP11.2 last weekend.
Now they're playing and they sound very good.
The bass on the cabinets turned out very good, a big plus for these SDDBH-T15.5R-AD cabinets is that you can tune the horn mouths with moveable ports.
Since there is no crossover to tweak, you do have the ports
Also some experimentation with damping materials in the chamber behind the driver needs be done.
So far I like them
Attachments
- Home
- Loudspeakers
- Full Range
- Alpair MAOP 10.2