I'm back I see what I did wrong on the function generator I was connecting the GND so after I disconnected then is working normally see image is that correct?
Welcome Juan sir
Attachments
hey bro I was checking your layout and there is a missing connection see image
thanks eagle-eyed
Attachments
Still busy with these .. for 100 vdc + / -
A33 with 100-0-100 VDC ? With 2 powers positive and 2 powers negative? He gona burn certanly.
Attachments
I think that each power out transistor must be have it's own base stopper resistor.
Better ask Mr. Mile.
Last edited:
hi mr mile...i complet fh11 with3pair irf640/9640 and its very good...
now i want made apex ax17 and i have queschen....
can i use 3pair 2n3055/mj2955 with 50 volt suplly...?
can i replace 1837/4793 driver's with tip41c/tip42c or bdw93/bdw94 for more power when i use 2pair c5200/a1943 in out put?
what maximum suplly for apex ax17?
apexax17 is better or ax20?
Last edited:
i'm desingn ax17 with 2pair out put and 1pair...and this projrct give many time as me....i most finish this ax17 then i go for a23/a33/a40...ans sr200 with sanken..but step by step....my pcb for ax17 is very nice when i finished it send pic for you...
now can i replace 2sc4793/2sa1837 with tip41/tip42 ?
