Okay, i will try another question:
Did anybod built a complete discrete outputbuffer solution for the WM8816 with Feedback loop?
Did anybod built a complete discrete outputbuffer solution for the WM8816 with Feedback loop?
This Thread is old and Veteran did delete some older files on the server. His old webpage did also moved and so.....the files are not accessible here.
But you can find all files by googeling in the Net. No biggy and if so...well...forget it!
cheers
Alan
But you can find all files by googeling in the Net. No biggy and if so...well...forget it!
cheers
Alan
MAS6116 - replacement for WM8816?
Veteran,
With the introduction of the MAS6116, can this project be revived an/or updated?
Frank
Veteran,
With the introduction of the MAS6116, can this project be revived an/or updated?
Frank
Hi Guys,
I have managed to get some WM8816 and have some as spare - if anyone is interested just contact me.
Its 8 Euro/each. If you take at least 3 then you will get a rebate.
New item in SSOP 20.
For the shipping fees - I need your location to tell you the exact fee.
Payment with PayPal.
cheers
Alan
I have managed to get some WM8816 and have some as spare - if anyone is interested just contact me.
Its 8 Euro/each. If you take at least 3 then you will get a rebate.
New item in SSOP 20.
For the shipping fees - I need your location to tell you the exact fee.
Payment with PayPal.
cheers
Alan
Hi,
Does anyone still have the source code for this project, or the schematics for the relay board? I cant find them anywhere!
Thanks!
Does anyone still have the source code for this project, or the schematics for the relay board? I cant find them anywhere!
Thanks!
DVBjunky said:Hi Guys,
I have managed to get some WM8816 and have some as spare - if anyone is interested just contact me.
Its 8 Euro/each. If you take at least 3 then you will get a rebate.
New item in SSOP 20.
For the shipping fees - I need your location to tell you the exact fee.
Payment with PayPal.
cheers
Alan
If i manage to get hold of the source code, i will be very intrested in these!
Thanks
I am still in need of firmware, and also i really do need the schematics for the relay board.
Thanks
Thanks
Try the backdoor website of Veteran.
http://www.unisonus.com/old/index.htm
More details only from former buyer of the relayboard, stamp etc. Veteran is not available since last year!
http://www.unisonus.com/old/index.htm
More details only from former buyer of the relayboard, stamp etc. Veteran is not available since last year!
DVBjunky said:Hi Guys,
I have managed to get some WM8816 and have some as spare - if anyone is interested just contact me.
Its 8 Euro/each. If you take at least 3 then you will get a rebate.
New item in SSOP 20.
For the shipping fees - I need your location to tell you the exact fee.
Payment with PayPal.
cheers
Alan
Hi Alan,
Do you have WM8816 yet? I am ready to purchase.
It is a large problem, I can find WM8816 nowhere.
Regards,
Sergiy
dunno if this the appropriate place for this post , has anybody had a look at maxims MAX5440 .. it seems to be a good IC for using as a volume control and has rotary encoder interface too..I have a few samples but I wanted some advice before I go ahead and design or do something ?
Below is the link for the datasheet...
http://datasheets.maxim-ic.com/en/ds/MAX5440.pdf
Below is the link for the datasheet...
http://datasheets.maxim-ic.com/en/ds/MAX5440.pdf
Hi,
again I have 2 x WM8116G in SSOP 20 size for sale. Very rare and hard to find.
My price is 27,50 Dollars (or 20 Euro) for 2 WM8816.
They are new and not used.
I managed to get again 5 pieces because this chip is awesome much easier to control and better audio performance than newer designs. Just my 2 cents. I used 3 in a new design and the other 2 are for sale.
Shipping fees are extra. Will ship in an envelope as registered letter. Shipping fees
depend on your country. Send me an PM or email with your full name, adress, Paypal account (I will send you an invoice) and I will send you the exact shipping fee.
If you accept price + shipping fees. You will get the PayPal invoice and after payment I will ship within 1 day.
This is a private sale. Not warranty. No tax receipt etc.
cheers
Alan
again I have 2 x WM8116G in SSOP 20 size for sale. Very rare and hard to find.
My price is 27,50 Dollars (or 20 Euro) for 2 WM8816.
They are new and not used.
I managed to get again 5 pieces because this chip is awesome much easier to control and better audio performance than newer designs. Just my 2 cents. I used 3 in a new design and the other 2 are for sale.
Shipping fees are extra. Will ship in an envelope as registered letter. Shipping fees
depend on your country. Send me an PM or email with your full name, adress, Paypal account (I will send you an invoice) and I will send you the exact shipping fee.
If you accept price + shipping fees. You will get the PayPal invoice and after payment I will ship within 1 day.
This is a private sale. Not warranty. No tax receipt etc.
cheers
Alan
i vahe a problem. when i connect 2x20 display in program mode i get after menu setting displays Display type: 2x16 and it stops, how to run it?
From programming instructions:
"LCD type"
Use ‘on/off’ button to toggle between 2x16 and 2x20; confirm with ‘volume up’ button
Christian
"LCD type"
Use ‘on/off’ button to toggle between 2x16 and 2x20; confirm with ‘volume up’ button
Christian
och, .. yep it works 🙂
can You tell me can i use for driver 9V,839mA trafo and for WM STAMP 435mA 9V. It will be good?
can You tell me can i use for driver 9V,839mA trafo and for WM STAMP 435mA 9V. It will be good?
Finally finished mounting the WM STAMP into my chassis today.
Vikash
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Vikash
- Home
- Amplifiers
- Chip Amps
- WM8816 digital volume control (WM STAMP)