Rudi,
You used for the soft start the BC548B which relplacement can I use there?
Rudi???
This is a simple calculation Patrick:
The forward voltage drop across a any (?) LED is about 2V. So 3V remain to drop across the resistor. Take a 3 KOhm resistor and 10mA will be flowing (the LED will then shine very bright!), take a 6.8 KOhm resistor and some 5mA will be flowing (still very bright) - so I advise you take a 10 KOhm resistor.
Best regards - Rudi
The forward voltage drop across a any (?) LED is about 2V. So 3V remain to drop across the resistor. Take a 3 KOhm resistor and 10mA will be flowing (the LED will then shine very bright!), take a 6.8 KOhm resistor and some 5mA will be flowing (still very bright) - so I advise you take a 10 KOhm resistor.
Best regards - Rudi
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Versatile and comfortable passive pre-amp