you could take in account also the AK4430 DAC for this project since it's very similar to the PCM5102 in respect to price and quality
Update for GB3
For all those interested in GB3: I contacted Amenero since the minimum of GB3 was reached some time ago.
Amaneros response:
So, it will hopefully not take long before we will receive the board(s).
Would be nice before X-mas 🙂
For all those interested in GB3: I contacted Amenero since the minimum of GB3 was reached some time ago.
Amaneros response:
Hi, i m just waiting the batch of boards shipment from the assembly farm. As for the previous GB, in the week end i'll start the GB sending a PM for paypal invoice.
I hope for Friday to receive the boards.
So, it will hopefully not take long before we will receive the board(s).
Would be nice before X-mas 🙂

Hi, the GB3 can be opened. Please send me a PM with an email address for paypal invoice.
If someone has already sent his email address please re-send it and in the message title write GB3.
Many thanks,
Domenico
If someone has already sent his email address please re-send it and in the message title write GB3.
Many thanks,
Domenico
For all of you who have Amanero board up and running free Christmas gifts downloads of Hi-Rez files from Free Linn Track ? Dawn Langstroth
cheers
marry Christmas all
cheers
marry Christmas all
I did a small adapter PCB to conveniently replace the cs8412 in my dac with the amanero for experimental purposes.
The unmounted positions are for a LTC6655.
The unmounted positions are for a LTC6655.
Attachments
Last edited:
I did a small adapter PCB to conveniently replace the cs8412 in my dac with the amanero for experimental purposes.
The unmounted positions are for a LTC6655.
nice choice of reference, you are making a flea type buffered ref/reg?
not sure if youve used this part before? it really likes a larger cap for the filter/bypass for lowest noise. I use film
Note
DSD output enable line to signal an incoming DSD stream.The card supports output mode only.
Sorry for the dummy question, but do you mean that this board converts a DSD stream to USB only, or is it the other way around? I have an ADC board with DSD output. Can this card convert that DSD stream to a USB signal that can be fed to my laptop computer? Is there a master/slave setting on the board? Thanks.
The board produces a DSD output, there are no provisions for either DSD or PCM input, the device is intended solely as an interface to a DAC. USB > I2S or DSD.
- Home
- Vendor's Bazaar
- USB to I2S 384Khz - DSD Converter