OPLDF is famous Official Pass Labs Disposal Facility ...... conveniently situated in very heart of European Continent - Serbia ....... 
yes - I said - they are practically the same , at least judging by datasheets
yes - I said - they are practically the same , at least judging by datasheets
Nice thanks 🙂
BTW does OPLDF have a franchise program? I sure would love to open a chapter for south Europe 😛
BTW does OPLDF have a franchise program? I sure would love to open a chapter for south Europe 😛
Some pub waiting The one and only....
ZM if I make slot on the front panel of my writing/pc deskfor for a 15" you thinks that will be a sissies work ?? 😛
suggestion for a double coils ones?
ZM if I make slot on the front panel of my writing/pc deskfor for a 15" you thinks that will be a sissies work ?? 😛
suggestion for a double coils ones?
I can do a try….
using the F6 Jensen or the ISKRA (thanks Zen Mod, still best sounding part) or a quadfilar Edcor.
I wrote to Jensen, a week ago to get the choice of Nelson…. no answer.
I have the PSU +-23V
I have tow simple 15V stabilized mini PSUs. Can these two give the bias voltage for left and right channel or do I need four…one for every SIT?
and did I hear right…. 10W at 8 Ohm speakers?
🙂
using the F6 Jensen or the ISKRA (thanks Zen Mod, still best sounding part) or a quadfilar Edcor.
I wrote to Jensen, a week ago to get the choice of Nelson…. no answer.
I have the PSU +-23V
I have tow simple 15V stabilized mini PSUs. Can these two give the bias voltage for left and right channel or do I need four…one for every SIT?
and did I hear right…. 10W at 8 Ohm speakers?
🙂
two mini PSUs = you can use them for both channels - if main PSU is also shared between channels ;
in contrary - if making dual mono , logically additional (stacked) PSUs must be separate 😉
of course - each VFet must have own biasing shebang (trimpot , cap yadayada)
regarding power - that slipped from/of my ,already weak , memory
and , yes , even if unobtanium - you know that another pair of Iskras is always available for you
in contrary - if making dual mono , logically additional (stacked) PSUs must be separate 😉
of course - each VFet must have own biasing shebang (trimpot , cap yadayada)
regarding power - that slipped from/of my ,already weak , memory
and , yes , even if unobtanium - you know that another pair of Iskras is always available for you
nope
bloody Ex-Yu , now strictly Slovenia
originally from telephone facilities , already several decades not produced
search for Papa's Koan thread
bloody Ex-Yu , now strictly Slovenia
originally from telephone facilities , already several decades not produced
search for Papa's Koan thread
I called Jensen on the phone and got my little trafo's maybe 5 days later.
If there is trouble let me know.
These little baztards are smaller than the F6 models.
If there is trouble let me know.
These little baztards are smaller than the F6 models.
Thanks Zen Mod, 🙂
I will start with common PSU for both channels and two supplementary Mini PSUs.
If sound is promising I will go for double mono.
Did anybody order successfully the new Jensen xformer?
I will start with common PSU for both channels and two supplementary Mini PSUs.
If sound is promising I will go for double mono.
Did anybody order successfully the new Jensen xformer?
Yep, 2 day lead time on my Jensen order so they must have them on the shelf ready to go. That styrofoam packing on the SITs made me nervous.
no need
original Toshiba packing is also styrofoam
that's maybe even part of original
Mark - is that you (12B4A) ?
original Toshiba packing is also styrofoam
that's maybe even part of original
Mark - is that you (12B4A) ?
- Status
- Not open for further replies.