oh, almost forgot, here is a rundown of whats going on with it all:
fronts: magnepan 1.6QR's
rears: magnepan SMGc's
center: phantom with fronts
subwoofer: deftech supercube reference
display: panasonic 36" tube (to be a loewe soon, i hope)
source: denon DVD-2200, sacd/dvda/dvd/cd
preamp/processor/receiver: yamaha rx-v1300 (waiting for new B&K to come out)
front channel amps: rotel 1070 per channel (bi-amped), will be rear channel amps when alephs are finished 🙄
rear channel amps: yamaha for now...
front speaker cables: synergistic research mark IIs and audioquest pike's peak w/ 48v DBS
interconnects: synergistic audio 2000
power cords: signal cable magic power, virtual dynamics basic power
video cables: audioquest VSD-1
power conditioning: 2x monster power HTS5100, one dedicated for audio, one for video. (currently for sale, getting richard gray unit)
PHEW!
fronts: magnepan 1.6QR's
rears: magnepan SMGc's
center: phantom with fronts
subwoofer: deftech supercube reference
display: panasonic 36" tube (to be a loewe soon, i hope)
source: denon DVD-2200, sacd/dvda/dvd/cd
preamp/processor/receiver: yamaha rx-v1300 (waiting for new B&K to come out)
front channel amps: rotel 1070 per channel (bi-amped), will be rear channel amps when alephs are finished 🙄
rear channel amps: yamaha for now...
front speaker cables: synergistic research mark IIs and audioquest pike's peak w/ 48v DBS
interconnects: synergistic audio 2000
power cords: signal cable magic power, virtual dynamics basic power
video cables: audioquest VSD-1
power conditioning: 2x monster power HTS5100, one dedicated for audio, one for video. (currently for sale, getting richard gray unit)
PHEW!
Loudspeakerkits:
Those line arrays are about as cool looking as it gets! I really need a couple stacks like that in my living room 😉
I'll be interestd in seeing your other kits as they are posted.
A couple of the models listed don't have links. Maybe the "micro" or SM model will work at home?
I've got 2 WPU 15 Selenium woofers and their d205ti 1" drivers sitting around......
Those line arrays are about as cool looking as it gets! I really need a couple stacks like that in my living room 😉
I'll be interestd in seeing your other kits as they are posted.
A couple of the models listed don't have links. Maybe the "micro" or SM model will work at home?
I've got 2 WPU 15 Selenium woofers and their d205ti 1" drivers sitting around......
cowanrg said:
Do they have one that does 720p yet... the local dealer has a loewe, nice TV, but not having 720p rules it out from consideration.
dave
Variac said:
Keep an eye in it there will be more on the way. It takes quite the set up to get a new one out. Work in progress for sure
🙄
BTW look at my Ford Audio site and hit the sound page and look for the link to the HCLA Project you will get a kick out of this one.
Morbid?
Perhaps, but then did you see this thread?
http://www.diyaudio.com/forums/showthread.php?s=&threadid=28066
Perhaps you and SY could sell a set to one of the frat houses over in Pullman?
Perhaps, but then did you see this thread?
http://www.diyaudio.com/forums/showthread.php?s=&threadid=28066
Perhaps you and SY could sell a set to one of the frat houses over in Pullman?
Thank goodness for broadband!
Well perhaps,unlike yourself,i cannot afford everything ;-)
Its good to see so many DIY projects, i get sick of HIFI forums were everythings prebought and then the owners stuff up things without knowning what actualy happens when u replace ur xovers etc..
heres my projects so far-
Bass is my favourite for now.
40hz 2m expo horn with 8" cheapie driver on it,hornresp modeled.
115db at listening position,good enough 🙂
lastyears project, jbl2226 15" in 175L 33hz tune,good for music, you really get more lows with the low tune its good.
Both of these run of 20w for now,and yes it is rather loud, the jbl only averages 106db in room but because it reaches low, it seems a rather 'solid presence' !
im getting 350watt plate amp in next few months..
planning a 33hz horn here
im just planning on a few of these for tv/pc
http://www1.jaycar.co.nz/productView.asp?ID=KC5150&CATID=&keywords=amplifier&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumber=&priceMin=&priceMax=&SUBCATID=
My problems now are- finding good info on
- designing horn main systems
in particular - matching DI etc, matching HF units with midrange horns... Like adrian macks horns.
ive got to use this speaker too on something,,
Well perhaps,unlike yourself,i cannot afford everything ;-)
Its good to see so many DIY projects, i get sick of HIFI forums were everythings prebought and then the owners stuff up things without knowning what actualy happens when u replace ur xovers etc..
heres my projects so far-
Bass is my favourite for now.
40hz 2m expo horn with 8" cheapie driver on it,hornresp modeled.
115db at listening position,good enough 🙂
An externally hosted image should be here but it was not working when we last tested it.
lastyears project, jbl2226 15" in 175L 33hz tune,good for music, you really get more lows with the low tune its good.
Both of these run of 20w for now,and yes it is rather loud, the jbl only averages 106db in room but because it reaches low, it seems a rather 'solid presence' !
im getting 350watt plate amp in next few months..
planning a 33hz horn here
An externally hosted image should be here but it was not working when we last tested it.
im just planning on a few of these for tv/pc
http://www1.jaycar.co.nz/productView.asp?ID=KC5150&CATID=&keywords=amplifier&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumber=&priceMin=&priceMax=&SUBCATID=
My problems now are- finding good info on
- designing horn main systems
in particular - matching DI etc, matching HF units with midrange horns... Like adrian macks horns.
ive got to use this speaker too on something,,
An externally hosted image should be here but it was not working when we last tested it.
Just one glance of my almost 20 years old magnetostatic speakers - "La Folia" - an Apogee Clone from a danish magazine "high fidelity".
The picture shows the back of the speaker, that made of small magnets - strips of window alarm ribbon on a plastic membrane of folie for use in an oven.
Low technology!
Unfortunately you can't hear the performance.
Jørn
The picture shows the back of the speaker, that made of small magnets - strips of window alarm ribbon on a plastic membrane of folie for use in an oven.
Low technology!
Unfortunately you can't hear the performance.
Jørn
Attachments
woofes said:
That's the C23, isn't it? I will use those too icw C-Quenze 18H52 and Lambda SB12 (more or less the same setup, only sealed enclosure). Still in progress btw
What mid/high filter do you use (first, second, third order, xover frequency, bessel/butterworth/LWR etc)?
Oops - I forgot - there is a website describing "La Folia":
http://www.audiodesignguide.com/mag/lafolia/lafolia.html
Jørn
on the picture you see the front of the speaker - wrapped up in foam for difraction reasons
http://www.audiodesignguide.com/mag/lafolia/lafolia.html
Jørn
on the picture you see the front of the speaker - wrapped up in foam for difraction reasons
Attachments
TheDude1884 said:
We have taken a couple of those and reengineered them to get some big gains in performance. One was new cabs + a midrange, the other, my favorite replaced the bottom end with a pr of Fostex bass drivers in a push-push enclosure.
dave
Re: My first TL speaker
On a single pair of woofers in a set of Hitachi boxes -- probably made by Panasonic/matsushita
dave
Tony.ca said:
On a single pair of woofers in a set of Hitachi boxes -- probably made by Panasonic/matsushita
dave
This weekend proved it: I'm suffering a disease - a vintage speaker collecting disease 😉
Once again, I was going to a recycling center i had not visited before and found so much old radios, speakers and stuff.. I wish I would have more money to buy them all
Of course I'm still only a beginner in this hobby - but it doesn't prevent me from taking some pictures about my newest purchase:
Once again, I was going to a recycling center i had not visited before and found so much old radios, speakers and stuff.. I wish I would have more money to buy them all
Of course I'm still only a beginner in this hobby - but it doesn't prevent me from taking some pictures about my newest purchase:
