SissySIT R.3

Kinda tough to do that….but there is a hole….hummmmm
 

Attachments

  • 14403D55-60E1-4258-9CBB-F23A3DB54701.png
    14403D55-60E1-4258-9CBB-F23A3DB54701.png
    169.6 KB · Views: 79
Last edited:
The inline leaded rectifiers can work in the upright position with a little help..
I have these in my Aleph J; they do run pretty warm, about 55° by the Papa scale.

ZM is still correct; the baseplate of a chassis makes a good heatsink for the brick style rectifiers.
 

Attachments

  • GSIB-5S rectifier.jpg
    GSIB-5S rectifier.jpg
    274.2 KB · Views: 114
  • Like
Reactions: Monk55
And so it begins….thanks to Mr. ZM.
you know your way around CCS Daughterboards?

I mean,there is only left for you to solder LM334, BC556 and trimpot, all being in bag with pcbs

and then, be sure to solder them with copper studs at least 5mm elevated from main pcbs

just a reminder ( for me, as first) - this is R.3 thread, while you have lastlast blingy - (42)


posted also in original (42) thread, post #109 https://www.diyaudio.com/community/...o-sissysit-42-as-a-cradle.387767/post-7256125 , note added in opening thread post
 

Attachments

  • SissySIT (42) sch.png
    SissySIT (42) sch.png
    179.5 KB · Views: 120
  • LM334 CCS schm.png
    LM334 CCS schm.png
    391.3 KB · Views: 124
Last edited:
  • Like
Reactions: har297