PeeCeeBee Preamplifier GB

[ksjung88]

Shaan..Thanks for the reply.

Hi Ksjung88

TP1 and TP2, with a 10K-22K resistor in series (LED may remain lit for quite some time until the cap bank drains). Or the two AC input of the board, with a single diode rectifier and 10k-22k resistor in series and a 100uF capacitor to smooth it slightly (LED will shut down quickly at power off).

 

[coolnose]

Invoice sent. 🙂

Shaan,

sorry for the hassle, but I did not receive anything (or lost it...) . Your PM box is full....

Thanks,

Max

 

[shaan]

Inbox cleared.

 

[outtek]

Hi Shaan, just finished seting rail voltages, bias and offset, just as you mentioned around 200mV and offset I managed to get it under 1mV, so far I am happy, verry little heat from the mentioned transistors, it doesnt look like they need a heatsink but I do have two small ones so I will add them. Just a quick tip about the documentation regarding the offset, Shaan mentiones how to adjust it only for one chanel the other one requires the procedure also... Shaan correct me if I am wrong.

Thanks,
Florin

 

[shaan]

Hi Florin.

You are right. I will add it to the guide.
Glad to know it's ready to play music for you. 🙂

Thanks for the input.

 

[Theodosis O.]

Hello Shaan,
Do you have any news about shipping to Greece ?
I thnk it is allowed now.

Thanks a lot.
Theo

 

[ksjung88]

Slow...but finally

hoping to finish wiring this weekend. =)

 

[shaan]

Hello Shaan,
Do you have any news about shipping to Greece ?
I thnk it is allowed now.

Thanks a lot.
Theo

Hi Theo.

Tomorrow I have a few shipping so will check and let you know.

 

[shaan]

Slow...but finally

hoping to finish wiring this weekend. =)

Looking nice and shiny! 😎

 

[shaan]

Hello Shaan,
Do you have any news about shipping to Greece ?
I thnk it is allowed now.

Thanks a lot.
Theo

Shipping to Greece has resumed. 🙂

 

[Theodosis O.]

Thanks Shaan, I sent pm.

 

[Oracle1]

Hello, is there two pcbs for me to Greece ?

 

[Oracle1]

I want 2 pcb's . Is it possible? I am in Greece

 

[shaan]

Hello, is there two pcbs for me to Greece ?

Yes. 🙂

 

[shaan]

First remarks on the quirks of the SIG control, from Poland!

Link to Polish audio forum post Preamp PeeCeeBee #144

 

[woodlands]

Shipping to Ireland yet ?

Hi , just want to ask if shipping has started yet to ireland yet ?
philip (woodlands_ie)

 

[shaan]

Hi Philip.

I will check status for Ireland (and UK) today and will update.

 

[shaan]

Hi , just want to ask if shipping has started yet to ireland yet ?
philip (woodlands_ie)

Hi Philip.

Ireland is still closed but UK has resumed. Please let me know if I should ship it to the UK address.

Thanks.

 

[shaan]

Hi guys.

I made this with what I saved from preamp sales.

Full Range Speaker Photo Gallery Post#4656

Thanks to everyone who bought the peeceebee preamp!

 

[Oracle1]

Shann very interesting speaker!

The boards when are you going to send!
i cannot wait!!!!!