Muses Volume

[meldano]

Yes, please write a PM.

 

[CV]

Hi Daniel,
I don't suppose you've measured the distortion of the new muses chip?
I'm curious as to how well it does vs the 72320 at higher levels, say 4V rms - any idea?
Best regards,
cv

 

[Theodosis O.]

Daniel, is 72323 hardware and software compatible with 72320 ?
Can one upgrade your old board, with the 72323.
Thanks...

 

[meldano]

Hello,
no, not compatible with the 72320.
There is no reason, the 72323 has better specs, need less external parts and is cheaper.

 

[Theodosis O.]

And what are the prices of the new boards and new controller ?
Thanks

 

[meldano]

Currently a little bit more than the old ones.
10->12€

 

[Sangram]

Please update first post with revised pricing

 

[meldano]

Done 😉
But we can close this thread because the actual version is only a small group buy.

 

[Sangram]

meldano, please report your post if you would like the thread closed.

 

[bambadoo]

This is a great support thread for us that bought and made this muses 72320 volume.

 

[Deenoo]

Galvanic isolator

I solved the galvanic isolation of the controller and MUSES with an ADUM1400 (thanks Daniel for the suggestion!) 4-channel digital isolator.
Working perfectly!

 

[meldano]

Nice ����

Updated documentation (see first post).

 

[meldano]

Last chance for the USA group buy.

 

[Vunce]

Hi Meldano,
If it’s not too late I’d like to sign up for a VC kit.
Located in USA. Thanks.

 

[APK]

Hi Meldano
Thanks for the boards received today, what connections need to be made between the two main boards for balanced input selection, I see that J1 is set from pin 1 to pin 2 for the balanced volume.

 

[meldano]

From bottom to top:
- Main board with assembled Relais and X1,X2 connector
- Volume board
- Full assembled main board
- Volume board
- Controller board

Please note: bottom main board is connected with X2 to the other main board and with X1 to all other boards.

 

[sunlai]

Hi Daniel,

I don't know how to send a picture in a private message, so I'll post it here.
Please correct me if I am wrong. Thanks.

 

[deerhunt]

Hi

I'm currently ordering according to Mouser BOM in post 1.
The diode TS4148RYG is on backorder until April.

I found some other TS4148 but they are in other housings (not 0805).
Can someone give me a suggestion on what would be compatible, both size and function?

Thanks
/Dag

 

[deerhunt]

I think I found out that 0805 is equal to SOD323?!
Perhaps this would work 621-1N4148WS-13-F?

 

[meldano]

Hi Daniel,

I don't know how to send a picture in a private message, so I'll post it here.
Please correct me if I am wrong. Thanks.

Perfect!