• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Mr Evil's Capacitance Multiplier Power Supply PCB

Jump to Latest
#81
Thanks to some kind help by one of the moderators, the BOM attached to the first post has been updated. It turns out that while the first post can be edited by me, the attachments, not so much.

The list of components is the same, but some notes have been added after a little input from the GB "subscribers"... 😀

If you have come across this thread just recently, please check out the two initial threads by MrEvil, or at least, some of the more recent technical discussion in the second thread, here:

http://www.diyaudio.com/forums/powe...hed-capacitance-multiplier-2.html#post3557054

http://www.diyaudio.com/forums/power-supplies/53359-finished-capacitance-multiplier.html
 
Last edited:
#89
Second PCB order, Updated List

The second production batch or circuit boards is scheduled to ship from the manufacturer in the next day or two. I will start sending out invoices as soon as I have a confirmed ship date. The boards from this group will start to ship on August 20.

There are a couple unpaid/unclaimed boards from the last order. If still not claimed by the end of this week, the boards will be added to the lot used for the current group.

If you are one of the people who was not covered by the last order, or you signed up since August 20, your name should be listed below. If you do not see your name, please send me a PM, or make a short post. Please do not try to duplicate the list in your posts, it makes the thread harder to read. Thanks.

jj506 4
TheShaman 2
Raj1 6
Pinnocchio 2
Tinitus 2
Salas 1
Spind 6
Atupi 2
Baswamin 2
Tome 6
Touister 2
markus22ch 4
Atupi 2
Rick G 2
BDL 2
ipolyakov 2
danbmellow 2
Vladco 2
Malvin 2
tagheuer/fponto 4
Presbel 2
yyzz 6
NiMac 4
Bagelgogo 4
K.A.B 3
carsten.witt 2
quan 2
Jameshillj 2
joshvi 2
Ryssen 2
John Bali 2
 
Last edited:
#90
The PCB's for the second production order are in transit, and payment requests are starting to go out. Please review the BOM, and check the technical discussion for any latest comments and component Q&A.

http://www.diyaudio.com/forums/power-supplies/53359-finished-capacitance-multiplier.html

The components were chosen so they can all be ordered from Mouser.com, without splitting orders. However, please verify you can source the parts where you live. There are alternatives for all parts in the BOM. I can also make a few transistor kits for those having problems with parts.
 
You must log in or register to reply here.
Top Bottom