I got my new lamp. It is for commercial projection use. people use it to replace the

[Speed.Cat]

HELP !
I´m checking this thread frequently.
I have a E-ballast 200W with input-voltage of 365V-380V for DC burners.
how can I run this in Germany with 230V?
I plan to buy also a UHP from YWH.
@YWH do you have 250W AC-burner? if yes I would need the specs please.

thanks
speed.cat

 

[ywh]

I don,t know what is burners,is it lamp?
I can get 250W AC-lamp,but your E-ballast is DC.
input-voltage is 365V-380V but you have 230V,can not start-up lamp maybe.

 

[Speed.Cat]

my ballast has a PFC converter and should work from 110-240V, so it´s ok.
my lamp is DC200W.
what is the advantage or disadvantage of DC lamps?
what is the advantage or disadvantage of AC lamps?
@ YWH:You have probably the experience?

here´s a pic from my lamp
what does all this wire do???
I know, that AC lamps do not have the wire.
please help

speed.cat

 

[nakita]

hi,
does anyone know where i can find specs (or datasheets) of EUC 150 C/ 00 lampdriver.
thanks

 

[ywh]

I dont know what is the advantage or disadvantage. but most projector is AC lamps.

this wire is trigger-wire.
AC lamps have the wire too but not so much.

 

[Speed.Cat]

I don´t know trigger wire?
what does it do?

speed.cat

 

[ywh]

to give a electric field , to halp trigger start-up.

 

[Speed.Cat]

@YWH
do you have 200W DC lamps also?


does anybody know the difference between AC and DC lamps?
I mean performance: brightness, lifespan, horizontal/vertical position...


speed.cat

 

[Steamer]

YWH

I read almost every post, And I'm am now almost certain I can use my IceCap e-ballast. The problem is, it says the output is 250W 120V. Is that too much?

Can someone please help me out? I like the color temp and life. But if it is less life with a 250W ballast, maybe I want a 150W ballast? Then again, maybe I don't want to spend that much to replace my current setup of the IceCap 250W, with an HQI TS 5500K 2000H double-ended bulb that I can get for a little over 40$ US from a UK lighting company.

Steamer

 

[Steamer]

By the way, i forget, what is the color temp of the 250W ?

 

[18wheeler]

YWH, I am having trouble to reach your email box.

你发送到yu.....@......om的邮件由于以下原因被退回 : 邮箱容量满

 

[18wheeler]

YWH,

I still have trouble to send your emails. all emails I sent in last few days had been return because of "mailbox full". do you have another email account that I can use?

 

[ywh]

hi speed.cat!
I have 200W DC lamps

do you sure you need DC lamps? a few projector need DC lamps,


hi Steamer!
i can not sure that your e-ballast is nice for my UHP lamp.you can try it.
my lamp is 7500k-9300k.9300k is news.

i have HQI too , 9000K, 6000H double-ended bulb, 40$ US too.

hi 18wheeler! once again.

 

[Steamer]

YWH

My ballast is 130V, Not 120V as previously stated. I would love that 6000H HQI, but the color would be too blue, almost purple. Could I put, say, a filter on it to bring it down to 6500K?

Steamer

 

[ywh]

Steamer

130V is not nice for UHP.

9000K is best color.if you play your 9000k projector and TV, you note the white image, 9000k projector is the same as with TV.
it is not purple, it is unalloyed white.

 

[Steamer]

Got a pic of that HQI?

Also, anyone know where I can get a good condensor and reflector for a double ended bulb setup?

 

[ywh]

condensor and reflector for a double ended bulb setup

 

[ywh]

250w,9000k HQI.
ONLY ONE

 

[CCMCornell]

ywh,

Do you still have access to the first light set in the thread with the 6500k color temp? Are there any options for USA voltage?

 

[Steamer]

condensor and reflector for a double ended bulb setup

I checked back a couple of pages and you say the lighthouse is $25. Is that with the condensor and reflector? if not, how much for the full lighthouse setup with the condensor, reflector, and the FC2 connectors?

Steamer