I got my new lamp. It is for commercial projection use. people use it to replace the

Status
Not open for further replies.
Jump to Latest
#2,623
hello ywh, i bought a used mitsubishi lvp x100e i think it takes a 280w bulb with consumption of 330w dont know what that means, id like to know 2 things

1 can you or anyone recommend a way to test this ballast out of the projector? im thinking of salvaging the lens and ballast since i cant get it working
2 do you have this bulb and how much $$$ would it be to texas

thanks alot for your help
 
#2,624
Hi tommygaus !
you need 200w BSM-DC, price is $80, shipping is $5. fee of paypal is $4

Hi thedarlington!
My 280w UMPRD can do it , price is $90, shipping is $5. fee of paypal is $4
about your ballast, can you found the optical coupler like this one, short it = power the ballast.
光耦－EL815、、816、817、819.jpg
 
Last edited:
#2,626
Just got lamp in mail

Hi Ywh!

Just got my lamp in the mail.

I was trying to reset the projector's lamp timer and can't figure out what I am doing wrong. The projector's lamp does not always want to come on and I think it may be because the timer still "thinks" the lamp needs changed. It won't reset for me.

Have you had any experience with that? It's a Sharp XR10X.

Thanks,

John
FDC2007
 
#2,630
Hi!

I need to replace the burner in my Sony Cineza LMP-H130 module. The reflector is spec'd: HS130AR10-7

Is there some trick to getting the old bulb out or uncemented without damaging the reflector? Is the fireplace cement at Home Depot type stores?

Merry Xmas!

-Rob
 
#2,633
Sharp XR10X

Thanks for the info. YWH that took care of it. Amazing how one thing out of order can throw everything off.

I am also having trouble with the lamp coming on periodically. I can hear it make a sound as if it wants to come on but does not always want to. I changed it to another bulb and it is doing the same thing.

Anyone have any ideas on that?

Thanks,

John
FDC2007
 
#2,639
Sorry, forgot to mention it's a 200W philips ballast.
Or is there no difference in the bulb?

The SP5000 lamps seems to die quite fast and easy...

Other question:
If I would use a 250W bulb:
Would it start?
Would it extend the lifetime?
Be better for heat?
Or destroy my 200W ballast?
 
#2,640
Lamp will not light Sharp XR10X

I have a Sharp XR10X that has to be reset about 4 times or so before the lamp will light. I reset the lamp timer and still the same problem.

Someone had also mentioned about a reset switch inside. I tried that as well and still the same problem.

When you try to turn the lamp on you can hear it make a faint sound like it is trying to light but the sound goes up and down like a low pitch whine or whistle.

Anyone have any dealings with such a problem or where I can go for an answer?

I have two different bulbs and bother react the same way so I don't think it is the bulb.

Thanks,

John
FDC2007
 
Status
Not open for further replies.
Top Bottom