I have a Toshiba TDP-S3 that I am trying to repair for my church. How much would a replacement lamp cost for it? Also, are there any good tutorials out there on how to replace this? I am new to projectors.
Okay, I've sent the payment for the bulb.
Let me know when you have it shipped.
You have initiated a payment for $90.00 USD to DIYproj@gmail.com. This payment will be completed once the recipient has accepted the payment.
This transaction will appear soon in the Recent Activity list on your Account Overview
Payment details
Amount: $90.00 USD
Transaction Date: Dec. 11, 2008
Transaction ID: 5L567755KJ980671W
Subject: Payment for 200w BSM-DC
Message:
Hi, I'm ordering the 200w BSM-DC. price is $80 each. shipping is $5 +$5 paypal fee (more than enough 😉 )
Let me know when you have it shipped.
You have initiated a payment for $90.00 USD to DIYproj@gmail.com. This payment will be completed once the recipient has accepted the payment.
This transaction will appear soon in the Recent Activity list on your Account Overview
Payment details
Amount: $90.00 USD
Transaction Date: Dec. 11, 2008
Transaction ID: 5L567755KJ980671W
Subject: Payment for 200w BSM-DC
Message:
Hi, I'm ordering the 200w BSM-DC. price is $80 each. shipping is $5 +$5 paypal fee (more than enough 😉 )
Hi morant !
you need 250W Metal Halide (250w BSV-DC), price is $40, shipping is $5.
Hi aarontn !
you need 270W BSM-DC, price is $80, shipping is $5. give me your emial address.
Hi venomxx !
DIYproj@gmail.com is 18wheel's email address. I can not open it, we need wait 18wheel open his email. need wait.
you need 250W Metal Halide (250w BSV-DC), price is $40, shipping is $5.
Hi aarontn !
you need 270W BSM-DC, price is $80, shipping is $5. give me your emial address.
Hi venomxx !
DIYproj@gmail.com is 18wheel's email address. I can not open it, we need wait 18wheel open his email. need wait.
Payment cancelled.
Okay, Ive cancelled the payment. Give me your paypal address.
I need it asap! 🙂
Okay, Ive cancelled the payment. Give me your paypal address.
I need it asap! 🙂
lol, DUH!
Thanks.. lol
YWH,
Check your paypal.
I've sent the payment for 2 bulbs.
Sent to:
Óà ÎÀ»ª
Email:
yuweihua@163.net
--------------------------------------------------------------------------------
Amount sent:
-$176.00 USD
Fee:
$0.00 USD
Total:
-$176.00 USD
--------------------------------------------------------------------------------
Date:
Dec. 12, 2008
Time:
09:12:31 PST
Status:
Completed
--------------------------------------------------------------------------------
Subject:
Óà ÎÀ»ª
Note:
200w BSM DC bulb is $80, shipping is $5
x 2
= 160+10/sh+6paypal fee.
= 176USD
Let me know when its shipped.
Thanks
Harry
Thanks.. lol
YWH,
Check your paypal.
I've sent the payment for 2 bulbs.
Sent to:
Óà ÎÀ»ª
Email:
yuweihua@163.net
--------------------------------------------------------------------------------
Amount sent:
-$176.00 USD
Fee:
$0.00 USD
Total:
-$176.00 USD
--------------------------------------------------------------------------------
Date:
Dec. 12, 2008
Time:
09:12:31 PST
Status:
Completed
--------------------------------------------------------------------------------
Subject:
Óà ÎÀ»ª
Note:
200w BSM DC bulb is $80, shipping is $5
x 2
= 160+10/sh+6paypal fee.
= 176USD
Let me know when its shipped.
Thanks
Harry
YWH,
I'm the one that posted about the Proxima DP6155 bulb and cages. The cage in the pic is the right one. Do you have the cages? If so, we need 4 cages and 2 bulbs, one of the cheaper ones and one of the $80 ones if that's the right price. Let me know along with your Paypal address and I'll send the total amount for whatever you can provide.
Thanks,
Jim
I'm the one that posted about the Proxima DP6155 bulb and cages. The cage in the pic is the right one. Do you have the cages? If so, we need 4 cages and 2 bulbs, one of the cheaper ones and one of the $80 ones if that's the right price. Let me know along with your Paypal address and I'll send the total amount for whatever you can provide.
Thanks,
Jim
ywh, my email address is aarontn (at) gmail.com
Is this a fairly easy modification? I am not an electrician. I have built computers for years, but that is all plug and play. This is a little different. Do you have any documentation or instructions? Or any that you could point me to?
Is this a fairly easy modification? I am not an electrician. I have built computers for years, but that is all plug and play. This is a little different. Do you have any documentation or instructions? Or any that you could point me to?
Bulb for Phillips Projector
Hi:
Need bulb for a Phillips projector. It is a 150W UHP.
Projector Model = LC1041/00
Number on lamp carrier = LCA3110
Markings on reflector:
UHP 150W 1.3
RLMPF0056CEZZ
MADE IN BELGIUM
101483968
Please provide proper part number / ordering information.
-Thanks
Hi:
Need bulb for a Phillips projector. It is a 150W UHP.
Projector Model = LC1041/00
Number on lamp carrier = LCA3110
Markings on reflector:
UHP 150W 1.3
RLMPF0056CEZZ
MADE IN BELGIUM
101483968
Please provide proper part number / ordering information.
-Thanks
Hi venomxx !
I received your payment, please wait.
Hi fdrjimc !
I can look for them.
Hi aarontn !
sent some file to you
Hi diviney!
you need 150e BSM-AC
I received your payment, please wait.
Hi fdrjimc !
I can look for them.
Hi aarontn !
sent some file to you
Hi diviney!
you need 150e BSM-AC
Cleaning the Reflector
Hello:
This is my first attempt to repair a projector bulb. I appreciate all the expertise you guys convey in this forum...
As I'm sure is common, my original bulb exploded. Luckily the reflector perfectly fine. There is however a dusty looking film covering the reflective coating inside the reflector. After removing the bulb / debris, I blew it out with compressed air, and it will probably work fine. I am debating whether to try and wash the thing out in an attempt to get some of the hazy film off. Maybe just some mild dish washing soap and water swished around? Maybe some glass cleaner? I don't want to do anything that risks further damage to the reflective surface however.
Anyone have any advice or experience in washing out the reflector before replacing the bulb?
-Thanks
Hello:
This is my first attempt to repair a projector bulb. I appreciate all the expertise you guys convey in this forum...
As I'm sure is common, my original bulb exploded. Luckily the reflector perfectly fine. There is however a dusty looking film covering the reflective coating inside the reflector. After removing the bulb / debris, I blew it out with compressed air, and it will probably work fine. I am debating whether to try and wash the thing out in an attempt to get some of the hazy film off. Maybe just some mild dish washing soap and water swished around? Maybe some glass cleaner? I don't want to do anything that risks further damage to the reflective surface however.
Anyone have any advice or experience in washing out the reflector before replacing the bulb?
-Thanks
DP6155 bulbs
YWH,
Thanks for checking for the DP6155 cages. How much for two bulbs for the DP6155? I noticed you mention an $80 bulb and a lesser quality one for $40 in the earlier postings. If both are available for the DP6155 I'd like to order one of each. Let me know what the total is and your Paypal address and I'll get you the payment ASAP.
Thanks,
Jim
YWH,
Thanks for checking for the DP6155 cages. How much for two bulbs for the DP6155? I noticed you mention an $80 bulb and a lesser quality one for $40 in the earlier postings. If both are available for the DP6155 I'd like to order one of each. Let me know what the total is and your Paypal address and I'll get you the payment ASAP.
Thanks,
Jim
Rebulb Instructions
YWH,
I forgot to ask, do you have any instructions for replacing the bulbs? My email address is fdrjimc at hotmail.com.
Thanks,
Jim
YWH,
I forgot to ask, do you have any instructions for replacing the bulbs? My email address is fdrjimc at hotmail.com.
Thanks,
Jim
Proxima 5610
Hi YWH,
Did a search of this forum found that "Tom pk" on pg 37 of this forum asked for bulb for a Proxima 5610.
"Hi I Look for to projector bulb PROXIMA 5610. original then metal halide 250w : UMR 250 firm USHIO
http://www.donsbulbs.com/cgi-bin/r/...7clmp|12.html
I for help thank.
tom.pk has attached this image:
Click the thumbnail to see the original image.
Pg 37 DIY forum
Hi tom.pk
http://www.ushio.co.jp/products/catalog/imp_e/1035.html
250W JYS/AC can replace your UMR 250 USHIO"
When I asked about the Proxima 5610 you have replied
"Hi morant !
you need 250W Metal Halide (250w BSV-DC), price is $40, shipping is $5."
Can you please confirm which bulb is the correct for Proxima 5610
Thanks Morant
Hi YWH,
Did a search of this forum found that "Tom pk" on pg 37 of this forum asked for bulb for a Proxima 5610.
"Hi I Look for to projector bulb PROXIMA 5610. original then metal halide 250w : UMR 250 firm USHIO
http://www.donsbulbs.com/cgi-bin/r/...7clmp|12.html
I for help thank.
tom.pk has attached this image:
Click the thumbnail to see the original image.
Pg 37 DIY forum
Hi tom.pk
http://www.ushio.co.jp/products/catalog/imp_e/1035.html
250W JYS/AC can replace your UMR 250 USHIO"
When I asked about the Proxima 5610 you have replied
"Hi morant !
you need 250W Metal Halide (250w BSV-DC), price is $40, shipping is $5."
Can you please confirm which bulb is the correct for Proxima 5610
Thanks Morant
Hi YWH,
I realise my original question was regarding the the Proxima 5600 but it is my understanding that the Proxima 5600 and 5610 both use the same lamp.
I have both of these projectors and require lamps for both.
Regards
Morant
I realise my original question was regarding the the Proxima 5600 but it is my understanding that the Proxima 5600 and 5610 both use the same lamp.
I have both of these projectors and require lamps for both.
Regards
Morant
余 卫华 ,
Could you please send me an email.
I did not received any email from you yet.
Try this one instead:
batyo@icedsl.hu
Could you please send me an email.
I did not received any email from you yet.
Try this one instead:
batyo@icedsl.hu
Hi YWH -It's been a long time since I've been on this forum
I've bought a JVC SX21 (250W HPS lamp - Part No BHL-5006-S) with 575 hours on the lamp - works great, but I was keen to have a spare lamp just in case
Do you have the correct replacement lamp and if so how much to supply and post to Australia
I've bought a JVC SX21 (250W HPS lamp - Part No BHL-5006-S) with 575 hours on the lamp - works great, but I was keen to have a spare lamp just in case
Do you have the correct replacement lamp and if so how much to supply and post to Australia
vip burners...
is there someone interested to vip burners
NEW osram original and made in germany?
is there someone interested to vip burners
NEW osram original and made in germany?
- Status
- Not open for further replies.