ywh,
Can you assist with L1708A replacement bulb and harness for a HP vp6121 projector?
Your help is greatly appeciated.
Dan D
dan@dlda.net
Can you assist with L1708A replacement bulb and harness for a HP vp6121 projector?
Your help is greatly appeciated.
Dan D
dan@dlda.net
Do you have the shp 180 watt bulb? The web site says it is out of stock. If no, when will you get more?
Hi shodan !
yes I need pictures.so can look for reflector and lamp housing .
Hi dldadlda !
I sell bulb only, without reflector.
Hi underage!
sorry I have no, can not get they again.
yes I need pictures.so can look for reflector and lamp housing .
Hi dldadlda !
I sell bulb only, without reflector.
Hi underage!
sorry I have no, can not get they again.
hi ywh...
I was just woundering if you know how long it will take before I get the bulb? I'm waiting like a child on christmas morning😀 😀 😀 😀 😀 😀
I was just woundering if you know how long it will take before I get the bulb? I'm waiting like a child on christmas morning😀 😀 😀 😀 😀 😀
no problemo😀
I can't wait till I get it! My projector has been "offline" the last 4 months
so it'll be nice when the bulb comes😉
I can't wait till I get it! My projector has been "offline" the last 4 months

ywh said:If your lamp is VIP R 270w, the Operating Voltage is 38V.it is a special Metal Halide lamp,not generic JYS can do it.
I can order this special JYS if you need.
Hi ywh!
I have Davis Powerbeam V and it uses Osaram VIP R270W/45 lamp.
I think it is the same special JYs.
Do you can still order this lamp and how much it cost?
Thank you for this excellent threat
-Pumbaa
ywh said:Hi Pumbaa !
I can still order this lamp price is $40, shipping is $5.
Hi ywh!
That's great! I sent $45 for moneybookers.
It is OK?
-Timo F (Pumbaa)
I have a Infocus X1 and I am looking for a replacement bulb to put inside the original housing to rebuild the lamp.
Someone can help me?
Best regards
Claudio
PS: 220V
Someone can help me?
Best regards
Claudio
PS: 220V
ywh...
you said i need one of these:
"you need 150W BSM-AC-H, price is $80, shipping is $5,"
I would like to buy 3 of them.
I would also like a bulb for a jvs sx-21u projector.
The lamp number is BHL5006... Do you have any of these?
you said i need one of these:
"you need 150W BSM-AC-H, price is $80, shipping is $5,"
I would like to buy 3 of them.
I would also like a bulb for a jvs sx-21u projector.
The lamp number is BHL5006... Do you have any of these?
infocus x1
ywh i was wondering if you had the bulb i needed available. i tried going to the website but it's down. also if you could tell me what i need that would be great.
it's an infocus X1
thank you.
ywh i was wondering if you had the bulb i needed available. i tried going to the website but it's down. also if you could tell me what i need that would be great.
it's an infocus X1
thank you.
Hi gkouvaras!
shipping would be for 5 bulbs is $10.
jvs sx-21u is JVC? is the bulb 250W NSH?
Hi pinion1000
I dont know what is your rneed?
shipping would be for 5 bulbs is $10.
jvs sx-21u is JVC? is the bulb 250W NSH?
Hi pinion1000
I dont know what is your rneed?
Hi ywh.
I got my bulb yesterday!!!!
But I got disapointed.... I thougth the "bulb" was the whole thing with with glass and stuff, but then I saw that I had to replace the bulb my self.
Is there any spcific way to do it? What I did yesterday was to scrape off the "glue thing" that kept the glassplate on top, the I took out the bits and pieces of the exploded bulb and I found out that I had to remove some hard white thing at the bottom to make the new bulb fit, but it still will not fit.
Can you help me?
oh... and how much would it have costed me if I wanted to but a bulb and a reflector as one and fully put together?
I got my bulb yesterday!!!!
But I got disapointed.... I thougth the "bulb" was the whole thing with with glass and stuff, but then I saw that I had to replace the bulb my self.
Is there any spcific way to do it? What I did yesterday was to scrape off the "glue thing" that kept the glassplate on top, the I took out the bits and pieces of the exploded bulb and I found out that I had to remove some hard white thing at the bottom to make the new bulb fit, but it still will not fit.
Can you help me?
oh... and how much would it have costed me if I wanted to but a bulb and a reflector as one and fully put together?
- Status
- Not open for further replies.
- Home
- General Interest
- Everything Else
- The Moving Image
- DIY Projectors
- I got my new lamp. It is for commercial projection use. people use it to replace the