I got my new lamp. It is for commercial projection use. people use it to replace the

[skywalker2]

By the way my projector is a KODAK KP1300X Projector hope you can help me

 

[skywalker2]

lamp

ywh,,

by the way is it possible, if i can put in a higher wattage lamp on my KP1300x, because right now its 150W can i use the 200W lamp. The lamp model is UHPRD150LU. Please confirm if this is possible.

Thanks

 

[skywalker2]

Lamp

Sorry,
The lamp Model is UMPRD150LU

 

[dldadlda]

HP 6121 replacement lamp

Does anyone still work with the HP 6121 projector.

I need someone to help me, please.

Feel free to email me for details.

Thanks

 

[jarkkoh]

Hi

Can you get needed info from these pictures?
I have to broke it to get it out.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

 

[dldadlda]

The markings on the ceramic portion at the base are:

NSH200BQ
USH10

followed by a circle with letters:

Hg

The side of the lamp itself is stamped:

T6050 15

There are no other markings on the assembly.

 

[a.markovic]

Hi , YWH

Philips LC 4345. Bulb is UHP.

Do you have a bulb for this projector?

 

[ywh]

Hi guymark!
OK ! double ender , I received your order.

Hi lewkev
you need BSM-AC-L, price is $80, shipping is $5.

Hi Niels Bak !
I seen the picture, you need 150W BSM-AC-L bulb, price is $80, shipping is $5.

Hi jarkkoh
you need 200W BSM-AC-H bulb, price is $80, shipping is $5.

Hi a.markovic
do yo have a picture of your reflector? can you test the V of lamp when it work?

 

[jarkkoh]

Hi ywh

Does bigger lamp work on that? 250w etc. To improve lamp life.

But if not, ill take that 200W BSM-AC-H bulb.

 

[Niels Bak]

Hi ywh

Sorry for asking you again, but I still have some questions.

First you said I need the 120W BSM-AC-H bulb, and after I asked again you said 150W BSM-AC-L bulb. 😕

Are they similar to the JYd-SE 120W/AC / JYd-SE 150W/AC
from http://diypro.us/ ??

The Projector is an A+K AstroBeam X110
In the specs. the lamp is an 120W UHP

http://www.projectorcentral.com/A+K-AstroBeam_X110.htm


What about the balast if I change it to a 150W bulb? Will it be ok, or will it burn?? Or should I use a 120W bulb?

Last question. How can I see if it's an AC / DC bulb I need??

I'm only able to pay with PayPal.

 

[lewkev]

Hi ywh,
Found a great deal on Ebay otherwise I'd of tried the DIY route.

Thanks

 

[ywh]

Hi jarkkoh!
200W BSM-AC-H bulb is the best.

Hi Niels Bak
I seen the "1.0" on your reflector, so that is low V start bulb. you need 150W BSM-AC-L.
1.0 is low V start bulb, other are High.
dont bother ballast. UHP is AC bulb, but there are 2 type UHP. H and L V start bulb.
pay with PayPal to 18wheel.

Hi lewkev
the problem is PayPal, PayPal can not transfer money to chinese bank. send money check only,

 

[Niels Bak]

Hi ywh

Is 150W BSM-AC-L similar to JYd-SE 150W/AC from http://diypro.us ???

Thanks

 

[ywh]

yes! 150W BSM-AC-L is similar to JYd-SE 150W/AC from http://diypro.us , but it is other produce

 

[Niels Bak]

yes! 150W BSM-AC-L is similar to JYd-SE 150W/AC from http://diypro.us , but it is other produce

Ok, then I will place an order for the JYd-SE 150W/AC.

And You are 100% sure it wil not damage the balast if if take the 150W instead of 120W??
In the projector Specs. it says original lamp = 120W.

Can I get more brightness with 150W??

Sorry for all my questions.

Thanks

 

[Janno]

Lamp??

Hi, I just got my moneybookers account working. so I'm transfering the money you wanted. 80$ for lamp + 5% in shipping, right? You're still able to send it?

 

[ywh]

Hi Niels Bak£¡

You Cannot get more brightness with 150W but only 120w, the ballast control power.

Hi Janno
yes! shipping is $5

 

[gkouvaras]

I have a hitachi cp-sw5500w... i am looking for a replacement bulb to put inside the original housing to rebuild the lamp... I was wondering if these are available... it says on the outside to the lamp "hscr220h7h" 80 volts, 220 watts...

 

[ywh]

Hi gkouvaras
you need 150W BSM-AC-H, price is $80, shipping is $5,

 

[shodan]

Hi,

YWH, I would like to get 2 lamps for my Sharp XG-NV2SB
they are 150W UHP lamps
I was wondering could you get the reflectors and the lamp and how much would it cost to have them assembled together ?

lastly, do you think you could get lamp housing for those too ?

(if you can't get the exact ones, maybe some other similar model, just something to old the lamp and reflector, I have 10 of those projectors but only 4 lamps and housings)

I'd like to have the price for each separate item
also do you think you could have just the ballast for this projector ?
maybe a more powerful one than the 150W that comes with it ?

thanks a lot

-shodan

ps let me know if you need pictures