I got my new lamp. It is for commercial projection use. people use it to replace the

[STEVE THE WOLF]

Hi ywh,

I have an Infocus X1 and X1A both use the same bulbs. Do you have bulbs that will work and are they in stock? Thanks in advance, Steve.

 

[Juissi]

I have 2 Osram 200w VIP lamps left over from Sahara S3620 DLP.
Both have ~1000 hours left any ideas where i can get suitable e-ballst or old school psu for it?

 

[Juissi]

ywh:
Do you have solution to replace Sanyo plv-z1`s 130W UHP bulb?

http://www.projectorcentral.com/Sanyo-PLV-Z1.htm



Cheers

🙂

 

[empeguser]

What kind of lamp shoul I use

I have a lamp that I took from a toshiba pj model TDP-S8 that was given to me. I removed it safely from the reflector, and it does look to be bad (the lamp timer has 1655hrs) What kind should I get from http://www.diypro.us/ to best match this one? And another thing I cannot find anywhere how to reset the lamp timer on this PJ any ideas?
<a><img src="http://i105.photobucket.com/albums/m217/empeguser/DSCN0472.jpg" </a> <p>

<a ><img src="http://i105.photobucket.com/albums/m217/empeguser/dscn0470.jpg" ></a>

 

[dgs3333]

Hi Ywh!

I would like to know if you can adquire a short arc 400w bulb that will work with this ballast+condenser+ignitor set. It is important that it has an L2 of ~76mm (better if it exactly 76).
In case it is of any help to you, here is the bulb I was using.
Thank you.

 

[empeguser]

HI again, I entered the photo links incorrectly and cannot edit them so here is the pictures of the lamp.

 

[moovinfast]

Hi YWH

What are my options now for a infocus sp4805 ? I got it used with a burnt out bulb so the cheaper the bulb the better to make sure its works ok.

 

[toocoop]

I am looking for a 270w shp bare bulb 65x70mm.

 

[ywh]

Hi STEVE THE WOLF
YES! I can get that lamp, but I can not get bulb in older price, they markup 14$ for me, so if you need, the price is 110$, include shipping .

Hi Juissi
I can get suitable e-ballst , price is $80.
what is psu?
JYD/AC cam replaca ZI

Hi empeguser
the glass globe is look perfect,you can use it if it can work .
if you need other one, that is JYD/AC.price is $60.

Hi moovinfast
you are need is same as STEVE THE WOLF.

Hi toocoop
65x70mm is caliber of reflector, what is type of reflector? pictures?

 

[empeguser]

Hello, thanks for your reply. The lamp does look good however when it is powered up it stays on for only about 30 seconds then the "lamp" light come on and it goes out. I checked the hour counter and it says this lamp has 1670 hours on it. Also does anyone know how to reset the counter on a Toshiba model TDP-S8 ?

 

[PC Master]

ywh,

I need bulbs for a BarcoGraphics 4000 projector and for the Infocus X1a/X2 projectors. Which bulbs do I order?

 

[jjgbmg]

Benq 8700 Lamp Replacement

Hi YWH, I have received the 4 bulb I ordered last Saturday in very good shape. It only took about 10 days, not bad at all. I am very pleased and I am getting excited about change my first bulb. Two months ago I change a cracked laptop screen and the tiny lamp in it. I believe your bulbs should be alot easier to change.

God's Blessings

JJGBMG

 

[ywh]

hello everyone!
the bran-new SHP bulb is out of stock, I have no anyone, and can not get it again.

I have JYS/DC only, about 70-80 brightness as bran-new SHP . but it is cheaper and can work in ballast of SHP. $40 each.


Hi empeguser!
you can try push 4 keys at same time: power , menu , confirm , input, when no power supply. then contact the power , dont loosen your finger in 3 seconds,

Hi PC Master !
JYS/DC only

Hi jjgbmg!
I can find tiny lamp too;-)
good luck!

 

[empeguser]

Thank you for your quick response again, I tried the keys power , menu , confirm , input when I applied power the temp, power and lamp light came on and that was it, what should I do after this the counter still reads 1658.

 

[biocyd3]

sony vpl-cs5 just the bulb

Hey was wondering if anyone knew which bulb i need to retrofit just the bulb in the lamp housing and where i can get one? its a sony vpl-cs5 thx.

JJackson

 

[tom.pk]

Hi ywh.

I need bulb for projectors HP XB31 ,original bulb 150W P-VIP.I for help thank

 

[PC Master]

ywh,

Is the JYS/DC for the Barco or for the InFocus? Have you had others use this bulb in this projector before? Also, what would be the expected lamp life?

(Thanks for the quick reply by the way.)

 

[PC Master]

Sorry to double post, but...

Your site doesn't list JYS/DC. How would I go about ordering one?

 

[ywh]

Sorry empeguser ! I have no way now.

Hi ! biocyd3
you need JYD/AC 180W, price is $60, shipping is $5.

Hi !tom.pk
you need JYD/AC 150W, price is $60, shipping is $5.

Hi !PC Master
160W UHM for the Barco,I have not this type bulb.JYS/DC 150w for the InFocus.1000hrs

 

[biocyd3]

lamp avail?

hey i checked the diypro site and it says temp unavail, can you tell me how soon it will be avail or where else i can find one? thx

JJackson