The M2C boards are back in stock, and the power supply boards.
However, the Edcor transformers are not. They have a six week lead time versus 3-4 for boards. Some more patience is required. If you just need a board, then private message me. Have all kinds of Mosfets in stock as well.
However, the Edcor transformers are not. They have a six week lead time versus 3-4 for boards. Some more patience is required. If you just need a board, then private message me. Have all kinds of Mosfets in stock as well.
Tea-Bag: I added a request to the 2018 spreadsheet.
1 M2C Board pair
1 PS Board
1 1 Edcor Transforner Pair
1 Vishay/Harris Mosfet 2N/2P
Thank you
1 M2C Board pair
1 PS Board
1 1 Edcor Transforner Pair
1 Vishay/Harris Mosfet 2N/2P
Thank you
Okay. I am going to lockdown the spreadsheet for now, and possibly create a new one.
I may have oversold on power supply and Edcor transformers. So I will have to prioritise based on supply, and possibly open another tab for future orders.
I should have enough M2 boards, but PS boards and transformers are near limit.
I can re-order, but this all takes time. Likely not everyone will follow through either.
So for now. I am closing until stock is analyzed.
I may have oversold on power supply and Edcor transformers. So I will have to prioritise based on supply, and possibly open another tab for future orders.
I should have enough M2 boards, but PS boards and transformers are near limit.
I can re-order, but this all takes time. Likely not everyone will follow through either.
So for now. I am closing until stock is analyzed.
Hi Tea,
If by chance you find you have extras, I'd be interested in a pair of M2 boards, a pair of power supply boards, a pair of transformers and matched FETS for both channels.
Thanks,
Steve
If by chance you find you have extras, I'd be interested in a pair of M2 boards, a pair of power supply boards, a pair of transformers and matched FETS for both channels.
Thanks,
Steve
Last edited:
I already signed up for the boards and start reading the forum about what transformer spec is.
I found different answers from 200VA to 500VA, +/-15 to +/-24V???
Does anyone have a final solid specs for the transformer for M2 use?
and any good brand to suggest?
Thank you so much!
I found different answers from 200VA to 500VA, +/-15 to +/-24V???
Does anyone have a final solid specs for the transformer for M2 use?
and any good brand to suggest?
Thank you so much!
Sign me up...
I sent a PM to add my name to the next round of boards and transformers.
Thanks,
Ryan
I sent a PM to add my name to the next round of boards and transformers.
Thanks,
Ryan
Nano,
18V+18V AC secondaries, with 300-500VA is recommended. 24V is the typical loaded DC figure after the power supply is loaded up.
A popular one in the US, but I see people overseas ordering to is Antek.
AS-4218 - 400VA 18V Transformer - AnTek Products Corp
Boards and Edcors arrived today 
Thanks very much Tea-Bag!
Thanks Papa Pass for the M2 and all the other treasures!
Thanks very much Tea-Bag!
Thanks Papa Pass for the M2 and all the other treasures!
Hopefully I haven't missed an email/PM. I should be on the list for one of everything.
Patient in Pennsylvania
Patient in Pennsylvania
Your short on the list to get everything. I did run out of power supply board in your case. They should be here early next week.
Flu in the house, so shipments may be delayed.
Thank you! Just a slight case of FoMO, nothing to worry about 🙂 Hope y'all get well soon!
Boards arrived today
Tea-Bag,
One word:
AWESOME!!!!
Thanks for the outstanding work and fast shipping on these!
Kind regards,
Steve
Tea-Bag,
One word:
AWESOME!!!!
Thanks for the outstanding work and fast shipping on these!
Kind regards,
Steve
- Status
- Not open for further replies.