Full Range Speaker Photo Gallery

[smallangryboy]

Cheers, we aim to please.

 

[planet10]

[so all components are now UK made]

Aren't the JX92 made in Denmark by Vifa? Or has Ted switched OEMs again?

dave

 

[Illusus]

nice. I like the stands.

 

[smallangryboy]

Illusus - cheers

planet10 - as far as I understand it, Ted assembles the drivers, the components are shipped in, though I could be wrong, but I'm not going to split hairs, we source them from the UK, that's close enough for me !

 

[doggy]

small horns

Had these 16 ohm monarch 3-1/2",alnico,steel frame round holes in basket.

Due to the shape of the material I had, designed the horn this shape. 12" wide X 30-1/2" high X6-1/4" deep; inside baffles are 4-3/16" wide.

They don't go down to far but a very enjoyable and cohesive sound. Will get some other opinions to fully comment later

 

[doggy]

front view

cheers
doggy🙂

 

[planet10]

Those are the awesome Coral holey-basket 103As. Cal has a pair of those (all tweaked up thou). Classified as a 4" these are widely considered the best of the 103A niche (althou there is an at least as rare National one (not as pretty) that is right up there.

dave

 

[doggy]

There were 2 in one box; I tried them before in that enclosure and was not impressed! I will have to demo these to Cal W. I did see the ones he had in his 3-way as a mid.

I'm not sure if I have the other box... I looked but there is so much stuff to get organized. cheers
doggy

 

[planet10]

There were 2 in one box

Yep... that's how they come (there is an 8 ohm version that comes in Sony TC500 Tapecorders (along with a REALLY nice pair of EL84/6V6/6AQ5 SE OPT (probably Tamura)

he had in his 3-way

Actually 4-ways.

I'm not sure if I have the other box.

Never ran across anyone who actually had a pair. Cal & Woody found singles. I found singles a couple years apart. maybe Bill F had a pair since i think he sold off 4. If you have 4 that is a grand total of 16 drivers i've heard of....

dave

 

[Cal Weldon]

I will have to demo these to Cal

I look forward to it, it'll sure be great to hear the Corals (Monarchs) again on their own without all those other drivers cluttering things up. 😉

 

[Ropie]

These are my early full range prototypes employing the Jordan 92s full range driver, and will be eventually partnered to our bespoke sub.

I know I'm a bit late with this but isn't this supposed to be a DIY gallery 😕

 

[sumacSK]

Sp-200x speaker

Hi all,

Here is my MLTL speaker using Monacor SP-200X fullrangers and Eminence APT80 tweeters. I designed it using Martin King's tool. I can hardly imagine something better for the price (you can get those monacors for 25 euro in my country...). Here is some pictures.

Martin

 

[sumacSK]

Sp-200x speaker

another one....

 

[sumacSK]

Sp-200x speaker

and drawing...

 

[Cal Weldon]

Martin,

Stick a pencil in the port and get those wires outta site.😉

Aren't you supposed to fasten them to the inside of the box?

Nice boxes by the way. Those measurements are cms?

Cal

 

[Josephjcole]

Not quite fullrange, but I thought I would post these anyways. Fostex 108e sigma, and an Eminence Delta 12lf. First order on the fostex, second order on the Eminence, centered around 300Hz. I'm quite thrilled with them, and have been so for some time. Still a little bit of tweaking that I would like to do, but I guess that never really ends....
Joe

 

[sumacSK]

Sp-200x speaker

Hi Cal,

Don't worry about those wires... 😉

Sorry but I don't understand what you mean with "Those measurements are cms?" I'm not that good in english, so maybe you can explain it little better...

Martin

 

[Nuuk]

Very nice Josephcole! You have matched them perfectly to your decor and it's good to see something 'different' as regards finish! 😉

 

[Cal Weldon]

Hi Martin,

cms = centimetres

 

[Cal Weldon]

Josephcole,

As Nuuk has already mentioned, very nice indeed.

Cal