Those of you who bother to read this thread deserve a tidbit:
Next week I will release ZV9 "JFET en Regalia" which will get us
an order of magnitude improvement over ZV8.
You will be able to use the ZV8 power supplies and much of the
original circuit, but the light bulbs will go.
Also, those of you wanting to play with current sources will
find allowances for that.
😎
Next week I will release ZV9 "JFET en Regalia" which will get us
an order of magnitude improvement over ZV8.
You will be able to use the ZV8 power supplies and much of the
original circuit, but the light bulbs will go.
Also, those of you wanting to play with current sources will
find allowances for that.
😎
Nelson Pass said:
How can we ever keep up with you Mr. Pass? Do you keep a sample of every Zen version for your personal museum?...if you have one or plan to have one. I'd like to someday just sit down at your museum and just listen to the Zenvolution of sound from V1 to Vn.
Looking forward to an evening of good read and things to learn about the Jfet.
They are pretty small indeed. There are 60 pcs on the pic, with a IRFP240 on top.
Hmmm...those JFETs look familiar...
Yes, they're pretty small. It'd be nice if they'd make a TO-247 version, but I'm just glad to have them.
Grey
Yes, they're pretty small. It'd be nice if they'd make a TO-247 version, but I'm just glad to have them.
Grey
No wonder, I guess🙂
Thanks again, Grey😎
Yes Blues, I am fiddling with a project like that, but now that NP is putting up ZV9 on PassDIY next week, I think I will wait and see what he has in mind for us this time🙂
Steen🙂
steenoe said:
I'm just drooling in anticipation
At this point in my DIY life, it's a cycle of read, , post, read.... 
So am I🙂
Blues, this is what I was planning on. (more or less at least) Its just some cut and paste work for now. The CCS is the one we used for the F2 clone and the capacitance multiplier is the Zen reg. without the zeners🙂 Nevermind the designations for now.
I will draw it in Eagle later on. I am looking forward to see if it has the slightest resemblance with the ZV9🙂
Steen😎
Edit. Be warned, the circuit on the schematic is not a tested design!
Hi,
I guess that CCS can be modified to use IRFP240 or similar. Basically, that would be "copy-paste" of CCS from ZEN V2 with the regulator from ZV3.
However, I don't think that Nelson did just that. There may be something else...uhm....
....patience, patience....😎
Regards,
Vix
I guess that CCS can be modified to use IRFP240 or similar. Basically, that would be "copy-paste" of CCS from ZEN V2 with the regulator from ZV3.
However, I don't think that Nelson did just that. There may be something else...uhm....
....patience, patience....😎
Regards,
Vix
...i'm still going to build the Zen V8 because i always wanted a
Zen Lite but didn't get around to it 🙂
Thought for the day:
Information is not knowledge
Knowledge is not wisdom
Wisdom is not truth
Truth is not beauty
Beauty is not love
Love is not music
Music is the best
Frank Zappa
Information is not knowledge
Knowledge is not wisdom
Wisdom is not truth
Truth is not beauty
Beauty is not love
Love is not music
Music is the best
Frank Zappa
Related with diyAudio amplifiers . . . 😀
Related for the music lovers . . . 😀
To be ultimately for music . . .
Not for making number of kits . . .
Not for making number of PCBs . . .
Not only for making Choky-style p2p wiring . . .
jh
Related for the music lovers . . . 😀
To be ultimately for music . . .
Not for making number of kits . . .
Not for making number of PCBs . . .
Not only for making Choky-style p2p wiring . . .
jh
I recall Frank Zappa reading the Talking A*sho*e story, temporary blackout for the name of the author.
Ocassionally i stand on my head to check. No difference whatsoever.
Does one have to be a man in tights to do a ZV9?
Ocassionally i stand on my head to check. No difference whatsoever.
Does one have to be a man in tights to do a ZV9?