GB-2 status update
aubmar (4 boards) ok, delivered
jkjkaufm (6 boards) ok, delivered
pesve (4 boards) ok, delivered
manniraj (4 boards) ok, delivered
outtek (4 boards) ok, delivered
Master Pain (2 boards) ok, delivered
bandol83 (4 boards) OK. delivered
prasi+friends (6 boards) ok
cgraf (2 boards), ok, delivered
baggerbole (4 boards), ok, delivered
zman01 (2 boards), ok, delivered
Johnny Canuck (2 boards), ok, delivered
AVWERK (4 boards), ok, shipped
Hui13 (2 boards), ok, shipped[/QUOTE]
Hey Prasi, boards received today in top notch condition.
Weighty little beasts they are, too.
Thanks very much for your effort on this GB.
Yer' a star dude.
aubmar (4 boards) ok, delivered
jkjkaufm (6 boards) ok, delivered
pesve (4 boards) ok, delivered
manniraj (4 boards) ok, delivered
outtek (4 boards) ok, delivered
Master Pain (2 boards) ok, delivered
bandol83 (4 boards) OK. delivered
prasi+friends (6 boards) ok
cgraf (2 boards), ok, delivered
baggerbole (4 boards), ok, delivered
zman01 (2 boards), ok, delivered
Johnny Canuck (2 boards), ok, delivered
AVWERK (4 boards), ok, shipped
Hui13 (2 boards), ok, shipped[/QUOTE]
Hey Prasi, boards received today in top notch condition.
Weighty little beasts they are, too.
Thanks very much for your effort on this GB.
Yer' a star dude.
Hi Prasi,
Thank you for the nice PCB's
I have a question about the Faston connectors: I have found this one on Mouser
http://www.mouser.fr/Search/ProductDetail.aspx?R=1742188-1virtualkey57100000virtualkey571-1742188-1
Did you have an other recommendation for another version or should I take this one ?
Best regards,
Marc
Thank you for the nice PCB's
I have a question about the Faston connectors: I have found this one on Mouser
http://www.mouser.fr/Search/ProductDetail.aspx?R=1742188-1virtualkey57100000virtualkey571-1742188-1
Did you have an other recommendation for another version or should I take this one ?
Best regards,
Marc
Hi Prasi,
Thank you for the nice PCB's
I have a question about the Faston connectors: I have found this one on Mouser
http://www.mouser.fr/Search/ProductDetail.aspx?R=1742188-1virtualkey57100000virtualkey571-1742188-1
Did you have an other recommendation for another version or should I take this one ?
Best regards,
Marc
Hi Marc,
Yes, those are perfect. and for the insulated mating part, you might be interested in these.
http://www.mouser.in/ProductDetail/...GAEpiMZZMvz8LftK4jerjSynp%2bx3x0siOylZjvGK0Y=
or you could use these termi blocks for vcc gnd and vee connections. http://www.mouser.in/ProductDetail/...=sGAEpiMZZMvPvGwLNS6718PaoTt7FM7cnmKyD3bhxOI=
Last edited:
fastons are 2 hole only, XRK has re-inforced solder joint. 3 holes are given for flexibility of mounting Termi blocks.
The one you selected has stability protrusions on the bottom (see the curvy protrusion). Those are very good for vertical alignment and stability during use. so you are good to go.
The one you selected has stability protrusions on the bottom (see the curvy protrusion). Those are very good for vertical alignment and stability during use. so you are good to go.
Weighty little beasts they are, too.
Nice and thick pcb material (.092 )
+1, PCBs are well made.
Thanks Prasi.
Last edited:
GB-2 status update
aubmar (4 boards) ok, delivered
jkjkaufm (6 boards) ok, delivered
pesve (4 boards) ok, delivered
manniraj (4 boards) ok, delivered
outtek (4 boards) ok, delivered
Master Pain (2 boards) ok, delivered
bandol83 (4 boards) OK. delivered
prasi+friends (6 boards) ok
cgraf (2 boards), ok, delivered
baggerbole (4 boards), ok, delivered
zman01 (2 boards), ok, delivered
Johnny Canuck (2 boards), ok, delivered
AVWERK (4 boards), ok, shipped
Hui13 (2 boards), ok, delivered
Received the boards. Very nice. Thanks very much.
aubmar (4 boards) ok, delivered
jkjkaufm (6 boards) ok, delivered
pesve (4 boards) ok, delivered
manniraj (4 boards) ok, delivered
outtek (4 boards) ok, delivered
Master Pain (2 boards) ok, delivered
bandol83 (4 boards) OK. delivered
prasi+friends (6 boards) ok
cgraf (2 boards), ok, delivered
baggerbole (4 boards), ok, delivered
zman01 (2 boards), ok, delivered
Johnny Canuck (2 boards), ok, delivered
AVWERK (4 boards), ok, shipped
Hui13 (2 boards), ok, delivered
Received the boards. Very nice. Thanks very much.
GB-2 status update
aubmar (4 boards) ok, delivered
jkjkaufm (6 boards) ok, delivered
pesve (4 boards) ok, delivered
manniraj (4 boards) ok, delivered
outtek (4 boards) ok, delivered
Master Pain (2 boards) ok, delivered
bandol83 (4 boards) OK. delivered
prasi+friends (6 boards) ok
cgraf (2 boards), ok, delivered
baggerbole (4 boards), ok, delivered
zman01 (2 boards), ok, delivered
Johnny Canuck (2 boards), ok, delivered
AVWERK (4 boards), ok, shipped
Hui13 (2 boards), ok, delivered
Received the boards. Very nice. Thanks very much.
Thank you Hui for the confirmation.
This concludes GB-2 and for GB-1,except oceanpeak and Joca, everyone else has confirmed.
regards
Prasi
always presentProject16 we need your help here.
I'm back on the layout
boyet0173 2 boards?? (not confirmed)
analogdiy 4 boards (not confirmed)
jpr_pt 2 boards (not confirmed)
PauloPT 2 boards (confirmed)
Voysto 6 boards (confirmed)
ravid 2 boards (confirmed)
its quite simple to copy the latest list and add your diya username and the no. of boards required and post it. i dont want to post a list with new requirements everytime and make the thread long and boring...lets make it easy for new visitors and KISS (Keep It Short and Simple).
analogdiy 4 boards (not confirmed)
jpr_pt 2 boards (not confirmed)
PauloPT 2 boards (confirmed)
Voysto 6 boards (confirmed)
ravid 2 boards (confirmed)
its quite simple to copy the latest list and add your diya username and the no. of boards required and post it. i dont want to post a list with new requirements everytime and make the thread long and boring...lets make it easy for new visitors and KISS (Keep It Short and Simple).
Last edited:
- Home
- Group Buys
- CRC Power Supply (Class A amplifier)