FastEddy said:Jeffery:
Got any drawings or specs for the case? I assume you made this stuff at home, but it does look good enough for other hobbyists to consider ...
ED
![]()
Hiii FastEddy
Do you understand ? 😀
That very quick explanation
i will make a hand picture
maybe can help you more
by the way, thanks FastEddy
do we have a rough price on the NXP180SMD modules?, seems to me that there the best of both worlds, small and powerful.
Hi dark_avenger
The NXP180 module when released in late March will cost $89.00AUD each plus postage and handling.
Yes the best of both world, I designed it so it DIYs could build a cheap high performance stereo or HT setup and still be very small and have the ability to scale it to what ever power level you wish.
I have a thread in the vendors bazzar with more information and other comments from other members if you would like to talk about it further there.
Sorry Jeffry I do not want to highjack your thread.
I am looking forward to seeing your completed NX150 amplifier.
You are doing a great job with it. One of the best I have seen.
Keep up the good work.
The NXP180 module when released in late March will cost $89.00AUD each plus postage and handling.
Yes the best of both world, I designed it so it DIYs could build a cheap high performance stereo or HT setup and still be very small and have the ability to scale it to what ever power level you wish.
I have a thread in the vendors bazzar with more information and other comments from other members if you would like to talk about it further there.
Sorry Jeffry I do not want to highjack your thread.
I am looking forward to seeing your completed NX150 amplifier.
You are doing a great job with it. One of the best I have seen.
Keep up the good work.
Car Audio
Hiii
I dont feel like that Anthony 😀
But i think you can make it Car Audio from NX 180
Build the amp connection, Im sure it will sound great
General make a tactic, we just finish the job
Cheers
Hiii
I dont feel like that Anthony 😀
But i think you can make it Car Audio from NX 180
Build the amp connection, Im sure it will sound great
General make a tactic, we just finish the job
Cheers

" ... Car Audio from NX 180 ..." ??
Might work fine if you cane get some decent higher DC voltage outta your car's 12 VDC system ... To get 100 watts per module, you would need continuous DV volts of 40+ volts and 2.5 amps or more. 😉
Might work fine if you cane get some decent higher DC voltage outta your car's 12 VDC system ... To get 100 watts per module, you would need continuous DV volts of 40+ volts and 2.5 amps or more. 😉
Check The Softart
Now i check the softstart
( Actualy this is the happy ending )
When i connect the AC connector
So the standby lamp is on
look the little blue light
The yellow lamp is death
( too long in solder work 😀 )
I make a fatal mistake when make this SS
I buy toroids for 2 x 12 V, but the SS need 2 X 6 V
But after Smithy666 give me some information
So the SS is ready to work now
Now i check the softstart
( Actualy this is the happy ending )
When i connect the AC connector
So the standby lamp is on
look the little blue light
The yellow lamp is death
( too long in solder work 😀 )
I make a fatal mistake when make this SS
I buy toroids for 2 x 12 V, but the SS need 2 X 6 V
But after Smithy666 give me some information
So the SS is ready to work now
Attachments
I want to finishing this amp soon
There is some mistake in my back plate
and must make last finishing in my front
plate and backplate
In Indonesia we said SABLON in english
call screen printing
, Jeffry
There is some mistake in my back plate
and must make last finishing in my front
plate and backplate
In Indonesia we said SABLON in english
call screen printing


Hi Anthony,
Out of curiosity; what is the reason for these modules to be discontinued:
NX 150 Synergy and NX 400 NL Synergy?
Regards
Håkan
Out of curiosity; what is the reason for these modules to be discontinued:
NX 150 Synergy and NX 400 NL Synergy?
Regards
Håkan
Hi Håkan
I am in the process of updating and replacing all of my amplifier range.
I had simply sold out of those amplifier modules and rather than
do another production run of them, I will be replacing them with a new higher performance modules and I will be reducing the number of them to a more managable level.
Also I am looking at moving back to VFETs and Bipolar output stages.
I hope this helps. 🙂
I am in the process of updating and replacing all of my amplifier range.
I had simply sold out of those amplifier modules and rather than
do another production run of them, I will be replacing them with a new higher performance modules and I will be reducing the number of them to a more managable level.
Also I am looking at moving back to VFETs and Bipolar output stages.
I hope this helps. 🙂
- Status
- Not open for further replies.
- Home
- Amplifiers
- Solid State
- AussieAmplifiers NX150 Spyder