Hmmm...oil caps you say. I just may have a few that I saved from our old physics lab, may even have the correct values.😀
Ditto on the motor run caps.
I also very much like the Obbligato Caps. Both kind, oil and copper tube. Good as coupling caps and crossover caps. Won't break the bank, either.
I also very much like the Obbligato Caps. Both kind, oil and copper tube. Good as coupling caps and crossover caps. Won't break the bank, either.
GM said:Greets!
Firefox can't find the server at czsr_bac.
GM

sorrrrrryyyyyyy
my typooooo!
http://czsr_bac.on.neobee.net/VOTfi.zip
Thanks Zen. Interesting comments on P13. Comparing the big horn to Quad ESL. I think the horn wins in the dynamic range area. eg SPL at 100 ft.
Geoff.
Geoff.
Geoff H said:................ Comparing the big horn to Quad ESL. I think the horn wins in the dynamic range area. eg SPL at 100 ft.
Geoff.
😉
you must be kidding

edit:
my post with "typo-ed" link is missing

seems that mods aren't sleeping .......hehe
Cal Weldon said:Yes I removed both your and GM's as they no longer were valid. Good eyes Zen Mod.
hehe
nice to know that we have here our own (heavily influenced ) mod
😉
Received quote for diaphragms from Bill at GPA. Much less costly than expected, $90.40 each in US dollars. Purchasing any diaphragms will have to wait until the new year after sufficiently recovering from the Christmas break festivities.
Also found some oil caps in my junk box, pair of 12mfd, and a pair of 4mfd. Paralleled with Solen caps will give me the values needed.
Tweaking the X-Os will have to wait until the weekend, far too busy at the moment.
Cheers
Also found some oil caps in my junk box, pair of 12mfd, and a pair of 4mfd. Paralleled with Solen caps will give me the values needed.
Tweaking the X-Os will have to wait until the weekend, far too busy at the moment.
Cheers
I hope Zen is not suggesting we have a biased mod lurking about.
Just because Cal encouraged me to start this thread doesn't mean he's biased, or does it. Care factor, not very high.
Good news from GPA. These days we tend to be scared of quotes. Grasshopper should have had the diaphragms in the x-mas list.
And a big Merry Christmas and new year to all.
Geoff.
Just because Cal encouraged me to start this thread doesn't mean he's biased, or does it. Care factor, not very high.
Good news from GPA. These days we tend to be scared of quotes. Grasshopper should have had the diaphragms in the x-mas list.
And a big Merry Christmas and new year to all.
Geoff.
ALTEC LANSING 416 8B
HI,
Brand new to this so forgive any inappropriateness.
I have just purchased a pr. of 416 8Bs for use in a system consisting of a trio of ALE drivers.
My challenge is to build an enclosure for the 416s.
NEED ALL THE HELP I CAN GET.
I have reviewed a ton of internet stuff and THINK I will use the Jensen Onken enclosure. Anything better?
Thanks
HI,
Brand new to this so forgive any inappropriateness.
I have just purchased a pr. of 416 8Bs for use in a system consisting of a trio of ALE drivers.
My challenge is to build an enclosure for the 416s.
NEED ALL THE HELP I CAN GET.
I have reviewed a ton of internet stuff and THINK I will use the Jensen Onken enclosure. Anything better?
Thanks
Biased? Darn right I am! Just like everything else in life I have my favourites. I've been ogling the A7 since I was a boy but it took till I was 40 before I even owned the cabinet.
Incidentally, the notch filter and L-pad are coming along nicely. I'm getting closer.
1948,
When GM shows up he will have many ideas for you, including his biased favourites 😉
Incidentally, the notch filter and L-pad are coming along nicely. I'm getting closer.
1948,
When GM shows up he will have many ideas for you, including his biased favourites 😉
Hi dlh1948. Welcome to the Forum, and this thread.
Onken and Altec. Seen that some where. Did you try Google? I did, brought up this thread! Back in post 41, Fred had a similar question re the 414s in Onken cabs.
Traditionally the 416 went into a bass reflex cab, many with the horn in front.
Tune the Onken to about 25 cycles and you should be there.
This one is for the 414 12" 30Hz.
http://ndaviden.club.fr/plancaisse/onken-414.html
You could scale that up to suit the 416s. The Onken can be made tuneable, which simplifies things a bit.
Cheers,
Geoff
Edit. Just saw Cals post. DLH, I should warn you, Cal and GM are big horn guys. Don't let them frighten you though.
Onken and Altec. Seen that some where. Did you try Google? I did, brought up this thread! Back in post 41, Fred had a similar question re the 414s in Onken cabs.
Traditionally the 416 went into a bass reflex cab, many with the horn in front.
Tune the Onken to about 25 cycles and you should be there.
This one is for the 414 12" 30Hz.
http://ndaviden.club.fr/plancaisse/onken-414.html
You could scale that up to suit the 416s. The Onken can be made tuneable, which simplifies things a bit.
Cheers,
Geoff
Edit. Just saw Cals post. DLH, I should warn you, Cal and GM are big horn guys. Don't let them frighten you though.
Re: ALTEC LANSING 416 8B
Greets!
Indeed we do! 😉 Regardless, 15/16" Altecs need big cabs to go low, so 9-10 ft^3 is the ideal minimum for decent LF response, with up to 20 ft^3 required for some versions when driven by a high output impedance amp.
Why scale up the Petite Onken when you can get the 'real deal' right above it? http://ndaviden.club.fr/plancaisse/onken360.html and if you want all the construction, etc., info it's available in French, but you don't really need to translate much, so an on-line translation will do: http://ebenisterie.musique.free.fr/RDS/Divers/Audiophile1977.pdf
http://ebenisterie.musique.free.fr/RDS/Divers/Audiophile1982.pdf
Anyway, hope everybody has a nice safe holiday! And on that note 😉:
http://www.thecompassgroup.biz/merryxmas.swf
GM
Greets!
Indeed we do! 😉 Regardless, 15/16" Altecs need big cabs to go low, so 9-10 ft^3 is the ideal minimum for decent LF response, with up to 20 ft^3 required for some versions when driven by a high output impedance amp.
Why scale up the Petite Onken when you can get the 'real deal' right above it? http://ndaviden.club.fr/plancaisse/onken360.html and if you want all the construction, etc., info it's available in French, but you don't really need to translate much, so an on-line translation will do: http://ebenisterie.musique.free.fr/RDS/Divers/Audiophile1977.pdf
http://ebenisterie.musique.free.fr/RDS/Divers/Audiophile1982.pdf
Anyway, hope everybody has a nice safe holiday! And on that note 😉:
http://www.thecompassgroup.biz/merryxmas.swf
GM
I'll have to expand my French. Limited to a few towns, rivers, a tower, and wine varieties. Wine being the strong point.
Nice freq response from the 416.
Geoff.
Nice freq response from the 416.
Geoff.
ALTEC LANSING 416 8B
Gentlemen
Thank you so much for the quick response.
The French sights are a bit overwhelming.
Could you please comment on www.studiomaudio.info/onken.html
as an alternative at least as good?
Also, I'm not locked into the 416 8Bs, so if you think something would
work better feel free to comment.
Thanks
Gentlemen
Thank you so much for the quick response.
The French sights are a bit overwhelming.
Could you please comment on www.studiomaudio.info/onken.html
as an alternative at least as good?
Also, I'm not locked into the 416 8Bs, so if you think something would
work better feel free to comment.
Thanks
I did, brought up this thread! Back in post 41, Fred had a similar question re the 414s in Onken cabs.
Hi Geoff,
Yep, and GM was kind enough to send me a Mathcad response graph of it w/ some series resistance (or high output Z amps), plus invalueble advice WRT driver mounting/bracing, a 'sun worshipping ritual' to appease old Altec cones and surrounds...😉
Happy Holidays,
fred
ps - a 'speaker wiz' gets mentioned in this Altec Project in an online audio review zine. hint: it's in a quote:
http://6moons.com/audioreviews/altec/dream.html
Hi GM,
I recently mused about what the trade-offs would be, MLTL's vs. Onken with Altec 414... What are your thoughts on this?
It got me curious coz I heard this enclosure design http://www.t-linespeakers.org/projects/yves/index.html
used with JBL 2213 (found in L100 monitors) in a buddy's system, and LF response is really good IMO even if the JBL's parameters isn't really that close to the Audax. The design was intended as a 'sub', so I think he used more stuffing as the JBL's still had good tonality up to the mids. Incidentally, the Audax T/S that were used in the TL's is quite close to the 414's. But with recent better predictive software like MJK's sheets, I think this 'traditional TL' could be improved upon...
Merry Christmas!
fred
I recently mused about what the trade-offs would be, MLTL's vs. Onken with Altec 414... What are your thoughts on this?
It got me curious coz I heard this enclosure design http://www.t-linespeakers.org/projects/yves/index.html
used with JBL 2213 (found in L100 monitors) in a buddy's system, and LF response is really good IMO even if the JBL's parameters isn't really that close to the Audax. The design was intended as a 'sub', so I think he used more stuffing as the JBL's still had good tonality up to the mids. Incidentally, the Audax T/S that were used in the TL's is quite close to the 414's. But with recent better predictive software like MJK's sheets, I think this 'traditional TL' could be improved upon...
Merry Christmas!
fred
Hi dlh
"Could you please comment on www.studiomaudio.info/onken.html
as an alternative at least as good?"
Similar size cabinet, volume wise. Be warned though, it appears to be generalized for a 15" driver. You need to apply the spreadsheet that GM suggested. Use metric units.
"Also, I'm not locked into the 416 8Bs, so if you think something would work better feel free to comment."
I don't know about better, that's subjective and personal. The 515 would be an alternative. The 411 is probably not suited. My choice would be the 604 in the corner cabinet.
Either way, avoid the low and wide cabinet. The driver needs to be up off the floor to avoid mid freq loss and or reflection.
Regards, Geoff.
"Could you please comment on www.studiomaudio.info/onken.html
as an alternative at least as good?"
Similar size cabinet, volume wise. Be warned though, it appears to be generalized for a 15" driver. You need to apply the spreadsheet that GM suggested. Use metric units.
"Also, I'm not locked into the 416 8Bs, so if you think something would work better feel free to comment."
I don't know about better, that's subjective and personal. The 515 would be an alternative. The 411 is probably not suited. My choice would be the 604 in the corner cabinet.
Either way, avoid the low and wide cabinet. The driver needs to be up off the floor to avoid mid freq loss and or reflection.
Regards, Geoff.
- Home
- Loudspeakers
- Multi-Way
- Altec Lansing