Thank you for the feedback ZM!
just go for it
Papa's palm rule and , say, 35W per device , whatever you meet first
listen and decide - is it better to your ears
just go for it
Papa's palm rule and , say, 35W per device , whatever you meet first
listen and decide - is it better to your ears
what if you can't hear well?
Alpeph J Parts Changes
Hi all,
Bought a couple of Aleph-J boards a couple years back and will finally get around to building them.
I have read 6L6's build guide, and a few additional pages bookmarked, but I am curious if there were any part changes or omissions I should be aware of?
I have this from the last few pages here:
R30 - Jumper
C6,C7 - DNP
So I don't have to go through every page (it would be fun if I had the time) are there any others?
thanks folks!
Hi all,
Bought a couple of Aleph-J boards a couple years back and will finally get around to building them.
I have read 6L6's build guide, and a few additional pages bookmarked, but I am curious if there were any part changes or omissions I should be aware of?
I have this from the last few pages here:
R30 - Jumper
C6,C7 - DNP
So I don't have to go through every page (it would be fun if I had the time) are there any others?
thanks folks!
what if you can't hear well?
then buy D class amp
or Levinson
or ........
Hi Roger,
Another one is to use 1k resistor for R8 instead of a 2k pot and setting it at 1K.
Cheers,
Dennis
thanks,
Should the pot first be adjusted in actual circuit and then a resistor selected, or has it been found by most builders that a 1K is about optimal?
Probably a dumb question... Can I connect a DAC directly to the input of the AlephJ (no preamp)? Something like this?
rBlink - Wireless DAC - Arcam
Volume control by the BT source device?
rBlink - Wireless DAC - Arcam
Volume control by the BT source device?
I can dial this down to 32v. (Sure Electronics' webstore Mean Well MW 36V 16.6A 600W AC/DC Switching Power Supply SE-600-36 UL/CUL PSU) Is it suitable for the Aleph J? thanks
- Home
- Amplifiers
- Pass Labs
- Aleph J illustrated build guide