![url]](https://www.diyaudio.com/forums/[url=http://image.ohozaa.com/view2/xXNexhkl9H0jvDaa][IMGDEAD]http://image.ohozaa.com/i/167/Yq4VkO.png[/IMGDEAD][/url])
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Maybe this will work
Oh my friend you must stop playing with these toys.🙂
The only method is the photographic.
Try this and then you believe me.
Thimios.
Hi apex, can you please share your g100 project?pcb layout?components list? etc?
and can I run it in 50vdc?thanks
and can I run it in 50vdc?thanks
AX-14J
This is AX-14J 😎
J = Jengkol, that what we call TO-3 transistor in my country 🙂
I should try that the new A17 🙂
but it will be slow 🙄
Regards
This is AX-14J 😎
J = Jengkol, that what we call TO-3 transistor in my country 🙂
thanks Apex for all your design,
I should try that the new A17 🙂
but it will be slow 🙄
Regards
Attachments
The jengkols do not look like original, John. But it's not way better than 3055 anyway
Nice work, output on A17 must be on botom (cooper) side of pcb (pins are reverted), NJM2068 instead LM4562 can be use.
Regards
Last edited:
I thought so(the marking doesn't look good), but maybe it is original one...The jengkols do not look like original, John. But it's not way better than 3055 anyway
I saw at post #3317 there are AX-14 also use jengkols (with better marking)
but don't worry I have spares some old motorola 15003-15004 if this one is blown 😀
I will try at rail +/-55VDC for 8 ohm load, is it is okay?
if they were original I believe they wont fail 😀 it is worth to try
I just realize it ... & I will try to redraw it if needed 🙂 & fortunely I have some LM4562 😎
Regards