In this case they are connected in series so it won't hurt if you mix them up in the build. But for storing them its good to be marked. Tiny glass Zeners are difficult to read.
I was more concerned the visually impaired like myself would put two 15v in one channel and two 12v in the other.
Good investment for this building process is loupe or magnifying glass of similar strength.
I too haven’t the best eyesight anymore...
Being a swiss, I most of the time play „horloger“ (watchmaker), and wear those funny looking magnifying glasses in front of my glasses...
otherwise I‘d never been able to read 12 or 15 on the zener. (But hey, now I know they’re marked [emoji16]...
You’re both really good peoples!
Being a swiss, I most of the time play „horloger“ (watchmaker), and wear those funny looking magnifying glasses in front of my glasses...
otherwise I‘d never been able to read 12 or 15 on the zener. (But hey, now I know they’re marked [emoji16]...
You’re both really good peoples!
I was more concerned the visually impaired like myself would put two 15v in one channel and two 12v in the other.
Good investment for this building process is loupe or magnifying glass of similar strength.
Valid concern. It could indeed happen between channels. One other way I found handy to inspect tiny letters and digits on components is to use the mobile phone's camera, especially in macro mode. Strong enough ambient light helps the camera's sensor further. Some phones are very good for macro and some are mediocre or non equipped.
This is both a bit easier to handle and less comfortable:
https://shop.gleichcom.ch/images/product_images/original_images/kopflupelc_z1-1-.jpg
(And, of course, the show-effect is almost phenomenal... )
https://shop.gleichcom.ch/images/product_images/original_images/kopflupelc_z1-1-.jpg
(And, of course, the show-effect is almost phenomenal... )
Last edited:
I use something like this 10X Magnifying Glass Lens LED Lamp Head Visor Loupe Jeweler Headband Magnifier | eBay
for even more show effect!
for even more show effect!
The Group buy for Salas boards is now open and will close on April 11 at 11:59PM ESTI am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
This is the last week to pre-order boards for the group buy.
The Group buy for Salas boards is now open and will close on April 11 at 11:59PM EST. I am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days. Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
The Group buy for Salas boards is now open and will close on April 11 at 11:59PM EST. I am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days. Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
Hello Salas, Tea and forum,
many thanks for the support.
The UFSP is up and running. First had Jantzen Silver coupling caps in and replaced them after 50 hours with CMRs.
If anyone is interested in a cap and component review, I'll give the phonopre some burning time and will start.
My system is perhaps interesting for the one and other.
Aleph J clone and p2p Transcendent Sound tube phono clone into Tang Band 1772 TQWT. Everything diy.
many thanks for the support.
The UFSP is up and running. First had Jantzen Silver coupling caps in and replaced them after 50 hours with CMRs.
If anyone is interested in a cap and component review, I'll give the phonopre some burning time and will start.
My system is perhaps interesting for the one and other.
Aleph J clone and p2p Transcendent Sound tube phono clone into Tang Band 1772 TQWT. Everything diy.
Hello Tea-Bag. Are there any more kits available?All current boards are shipped out from the Group buy, and I have extras available, and parts etc.
- Home
- Group Buys
- GB Group Buy Salas UltraFSP RIAA