If they seem quite professional, although the price seems a bit high ... those indicative prices that you have provided, are shipping included?
Sorry i don't understand.
I am building myself the speakers.
Talking about this i must say that very soon the 3wc will sing. It is always longer that espected...i got some dedails to fix and take times.
So...
One is 99 % finished. I only got to put feet and ad some oil on the oak for the finition.
The other one is gluing now. I got details also to fix but 2 h of works and it is done...
I think this sunday they will be singing. I ll try to send you pictures...
Shipping was included inside Germany, if you were asking me... 🙂
Olivier... already burning-in?
I worked on my xover today, exactly as Troels was describing them on his website. Soldering this week.
Attachments
You might want to reconsider how you arranged the coils. They should be perpendicular to each other to reduce crosstalk.
Hi every one.
Not burning yet. I had much work today (i take care of grapes to make wine) but i had time this evening to finish the box.
The two speakers are in the house but as children were sleaping i couldn t put the drivers and try it.
Tomorrow will be the day they wil sing.
Finition is not perfect but i am happy with the style.
I ll try to send you pictures.
Not burning yet. I had much work today (i take care of grapes to make wine) but i had time this evening to finish the box.
The two speakers are in the house but as children were sleaping i couldn t put the drivers and try it.
Tomorrow will be the day they wil sing.
Finition is not perfect but i am happy with the style.
I ll try to send you pictures.
Thank you, it is exactly following Troel's description though, what should be changed? Could it stay on the same layout/plate? Thank you.
edit: pic from Troel's website
Attachments
Last edited:
Lukrez pretty pictures. It seems to be just like Troel. I enclose the photo version Be, as your construction.
You can do better than Troels' photos. As I wrote before, make sure the coils are perpendicular to each other.
I didn’t make x over like Troels but i am not sur i respect tour preconisation
Shared album - Milliau Olivier - Google Photos
Here sole other pictures
Shared album - Milliau Olivier - Google Photos
Shared album - Milliau Olivier - Google Photos
Shared album - Milliau Olivier - Google Photos
Shared album - Milliau Olivier - Google Photos
Here the big trouble i had
https://photos.app.goo.gl/2BLeGkXSvX3jvZzQ7
https://photos.app.goo.gl/wTUP7RW2gDczkmXi9
Then
https://photos.app.goo.gl/BtmtaTcuf3ehXtJh6
https://photos.app.goo.gl/pNCKAXnorMcz24Ln7
https://photos.app.goo.gl/T83YMigbnZgqLDKU6
😎
Very nice.
Edit: So should I move this (red) coils to the outside like showed on the pic?
Attachments
Last edited:
IMO leave that coil where it is. Troels had no problem with it in that position.
However if you want you can turn the small coil, on the left, in an upright position. Then it will be 90 degrees to the coil in the middle. You need to glue/ cable tie it so it does not fall over.
In a different photo I saw a resistor cable tied to a cap. Hopefully that resistors does not get hot. I would not do that.
Generally people use larger wattage resistors or resistors in parallel when using big amps. This speaker is efficient so perhaps big wattage amps will not be used. Just my two cents.
However if you want you can turn the small coil, on the left, in an upright position. Then it will be 90 degrees to the coil in the middle. You need to glue/ cable tie it so it does not fall over.
In a different photo I saw a resistor cable tied to a cap. Hopefully that resistors does not get hot. I would not do that.
Generally people use larger wattage resistors or resistors in parallel when using big amps. This speaker is efficient so perhaps big wattage amps will not be used. Just my two cents.
It was in Oliv009 photo.
However I would not put a resistor on top of another component. There is enough room to place it on the board.
However I would not put a resistor on top of another component. There is enough room to place it on the board.
Ok - thank you for clarification.
I'll then move the capacitors from the top of the coil to the plate.
I'll then move the capacitors from the top of the coil to the plate.