Or this
Has anyone test this pcb .
I want try to rebuilt sr 200 in a diferent version pcb.
Thanks to all.
regards.
sr200 studio refer.
I try it anyway
Thank you
Υours forever.
Oh dear Alex, welcome pcb specialist!
I try it anyway
Thank you
Υours forever.
sr 200
i has replace R18 WITH 2K2 .
the problem became smaller but it's still here.
please take a look at these photos.
I has made some modifications but.....
I replace 2sc5200/a1943 with 2sc3264/a1295 two pairs upgrade rail voltage to +/-45v .
When this problem is present the R=10R (PART OF RC IN OUT) OVERHEATED.
I have a video from testing process Where the problem is clearly visible .Maybe tomorrow i can upload it.
Strangely when overdriving the unit seems to disappear.
Hi My Apex .
i has replace R18 WITH 2K2 .
the problem became smaller but it's still here.
please take a look at these photos.
I has made some modifications but.....
I replace 2sc5200/a1943 with 2sc3264/a1295 two pairs upgrade rail voltage to +/-45v .
When this problem is present the R=10R (PART OF RC IN OUT) OVERHEATED.
I have a video from testing process Where the problem is clearly visible .Maybe tomorrow i can upload it.
Strangely when overdriving the unit seems to disappear.
Attachments
Hi Thimios,
I encountered oscillation when I build mine, check my post in #770. Also MJ777 found two missing caps, read his post in #810. Though it's a different PCB layout but I hope it will help you.
BR,
Junie
I encountered oscillation when I build mine, check my post in #770. Also MJ777 found two missing caps, read his post in #810. Though it's a different PCB layout but I hope it will help you.
BR,
Junie
Last edited:
sr200 studio refer.
hi friend i see this about 100pf decapling at the input.
This included to alex mm for Sanken pcb witch i use
Strange is that unit is funcion and i test today hard and is still function......
junie have you ever checked your own amplifier with oscilloscope?
hi friend i see this about 100pf decapling at the input.
This included to alex mm for Sanken pcb witch i use
Strange is that unit is funcion and i test today hard and is still function......
junie have you ever checked your own amplifier with oscilloscope?
Attachments
Last edited:
sr200 studio refer.
what's your opinion about this problem?
Please see my post 1167 either
best regards.
Hi Mr Adrew
what's your opinion about this problem?
Please see my post 1167 either
best regards.
Attachments
Last edited:
Thank you for this new version, leave the link to the previous version. for they are not lost looking for it.
version 3.1
Replace 2k2 with 1k8 or 1k5, this test is on 20kHz, can you post with 1kHz and 10kHz?
Of cource i can.
I have a full test ,results i post soon.
thanks Mr. Apex.
best regards.
sr200 studio refer.
🙂This time i have this
Take a look
I connected the oscilloscope on R=5R6 (R/C OUTPUT)
I have connect in the same point a frequency meter. i put at the input of the amlifier a squerwave 5.84khz AT THIS MOMENT THE RESISTANCE overheated and the frecuency meter shows the DOUBLE FREQUENCY.
This never happens with sinusoidal.
The second photo sqerwave at 1Khz you order🙂
And in photo 3, 20khz/1volt RMS inp. 32.55 v RMS OUT in this cace problem not visible .If try to minimaze signale input a little it is visitable again.
🙂This time i have this
Take a look
I connected the oscilloscope on R=5R6 (R/C OUTPUT)
I have connect in the same point a frequency meter. i put at the input of the amlifier a squerwave 5.84khz AT THIS MOMENT THE RESISTANCE overheated and the frecuency meter shows the DOUBLE FREQUENCY.
This never happens with sinusoidal.
The second photo sqerwave at 1Khz you order🙂
And in photo 3, 20khz/1volt RMS inp. 32.55 v RMS OUT in this cace problem not visible .If try to minimaze signale input a little it is visitable again.
Attachments
Last edited:
