diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Vendor's Bazaar (https://www.diyaudio.com/forums/vendor-s-bazaar/)
-   -   Output transformers for DACs (https://www.diyaudio.com/forums/vendor-s-bazaar/327794-output-transformers-dacs.html)

bisesik 14th July 2019 03:55 PM

casshan, ilgavro - I will inform you once it will be ready.
Is it OK compared to Ian's LL1544aTranformerIV board if I extend the board to the right side for placing RCAs? Or may it be more suitable if to place RCAs on top instead the right side? What do you think guys? Owners of Ian's products, what do you think? :)

sq225917 14th July 2019 04:10 PM

I'm balanced all the way so it works for me

bisesik 14th July 2019 04:33 PM

1 Attachment(s)
If I will make this design, then compared to Ian's IV board it will looks this way:
Attachment 768229

Myint67 14th July 2019 06:35 PM

Quote:

Originally Posted by bisesik (https://www.diyaudio.com/forums/vendor-s-bazaar/327794-output-transformers-dacs-post5851658.html#post5851658)
Hi guys!
Due to the big interest for the Ian's 9038 DAC, I am planning to make suitable I/V board of my transformers. Here is a draft. Any additions / recommendations which I need to take into consideration?
Attachment 768189


Nice
Can workable with 9038 pro dac ?

bisesik 14th July 2019 07:27 PM

Quote:

Originally Posted by Myint67 (https://www.diyaudio.com/forums/vendor-s-bazaar/327794-output-transformers-dacs-post5851958.html#post5851958)
Nice
Can workable with 9038 pro dac ?

As I understand - the question is regarding transformers? Then yes, transformers definitely workable with 9038PRO.

casshan 15th July 2019 07:34 AM

Quote:

Originally Posted by bisesik (https://www.diyaudio.com/forums/vendor-s-bazaar/327794-output-transformers-dacs-post5851835.html#post5851835)
If I will make this design, then compared to Ian's IV board it will looks this way:
Attachment 768229

I think it is compatible to Ian's transformer board because XLR position is kept as same as the original one.

casshan 15th July 2019 07:35 AM

Quote:

Originally Posted by bisesik (https://www.diyaudio.com/forums/vendor-s-bazaar/327794-output-transformers-dacs-post5851798.html#post5851798)
casshan, ilgavro - I will inform you once it will be ready.
Is it OK compared to Ian's LL1544aTranformerIV board if I extend the board to the right side for placing RCAs? Or may it be more suitable if to place RCAs on top instead the right side? What do you think guys? Owners of Ian's products, what do you think? :)

Could you provide with all necessary components?

bisesik 15th July 2019 08:08 AM

I am planning to sell I/V board with 2*XLRs + 2*RCA + 1*2x5header + 4*resistors Dale RN60D for secondary. The price for kit will be 20USD (including shipment).

BTW, there was a mistake in PCB. To provide the BAL signal it is needed to use two resistors instead of one.

ilgavro 15th July 2019 11:28 AM

All is good!!

Myint67 16th July 2019 07:49 AM

Tda 1541
 
1 Attachment(s)
Can I use TDA1541 cen passive with out put transformer?


All times are GMT. The time now is 11:37 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio

Wiki