Hi stanislav1957,
You can post in Russian or other languages as long as you also post an accurate English translation.
This is an international web site where the primary language is English. So please post in English or at least include an English translation.
-Chris
Sorry, I didn't notice.This is a preamp with a tone control.
Attachments
Hi diyaudio,
just finished my headphone amp. It was planned as a kind of "practice amp", before the voltage on the rails gets higher…
Preamp with LM4962, symm. input, -12dB/-6dB/0dB selector, Baxandall volume control.
The amp section is made with discrete components only, BC846B, BC856B, MJE243, MJE253 and some chicken feed
So far, so happy No noise in the headphones, no hum, no ground loops, no audible distortion (~0,005%, 10Vrms, 1kHz), clean sound with a wide stage... drives everything from 16R to >600R headphones. It's the upgraded SMD version from a pure THT version before.
Making your own gear is pure fun
just finished my headphone amp. It was planned as a kind of "practice amp", before the voltage on the rails gets higher…
Preamp with LM4962, symm. input, -12dB/-6dB/0dB selector, Baxandall volume control.
The amp section is made with discrete components only, BC846B, BC856B, MJE243, MJE253 and some chicken feed
So far, so happy
No noise in the headphones, no hum, no ground loops, no audible distortion (~0,005%, 10Vrms, 1kHz), clean sound with a wide stage... drives everything from 16R to >600R headphones. It's the upgraded SMD version from a pure THT version before.Making your own gear is pure fun
Attachments
Hi diyaudio,
just finished my headphone amp. It was planned as a kind of "practice amp", before the voltage on the rails gets higher...
Making your own gear is pure fun
The enclosures? Where did you get them, or are they DIY?
Regards Johnno