Go Back   Home > Forums > >

Headphone Systems Everything to do with Headphones

LuFo Lite - a 1 Transistor SE Class A Headphone Amp
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools
Old 18th July 2021, 12:40 PM   #1
xrk971 is offline xrk971  United States
Got Foam?
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Metro DC (Virginia)
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
Default LuFo Lite - a 1 Transistor SE Class A Headphone Amp

This is an outshoot from the LuFo amp described in the Pass Forum here. Someone asked for something really simple and so I removed the upper cascode and dropped the voltage and bias current. What happens when you drop a transistor from a 2 transistor amp? You get perhaps the simplest amp in the world. Paired with a choke load (and I am using inexpensive microwave oven transformers) you can get some amazing sound. The PSU requires low noise and slow ramp up in order to prevent the SMPS from going into hiccup mode. So you do need a capacitance multiplier unless you are using a car battery as your power source.

Here is the circuit:
Click the image to open in full size.

The predicted performance for 15mW into 32ohm headphones is 0.0085% THD and with a superb SE Class A harmonic profile.

The amp was very simple and can be dead bugged on the 3 pins of LU1014D TO247 IMS aluminum PCB adapter board (Gerbers and PCBs available here).

Here is the LU1014D mounted on the IMS adapter board which makes it easy to use on a normal heatsink:
Click the image to open in full size.

In practice, there is something off with the model of the LU1014D in LTSpice and I needed to use a 2.5ohm resistor below the MOT to get the bias current low enough (1.5A). The circuit has been verified by myself and Jwjarch so far. The sound IMO, is very dynamic, natural, organic and transparent. Like nothing there but the muscle. It is very quiet - cannot tell it’s on. If you use the Cap Mx with a slow 20 second ramp up, there is no turn on pop sound either.

Proof of concept P2P build:
Click the image to open in full size.

One channel up and running:
Click the image to open in full size.

And btw, it will power an 8ohm speaker (as shown in photo) to 1W with respectable distortion.

I was able to use the output of my DAP source without a preamp and got the headphones as loud as I would care to ever listen to. But if you need more output, any decent preamp should work.
If you want to have higher output voltage swing - just build the LuFo but with a single cascode MOSFET and keep bias current circa 1.5A. That will let you get up to 25Vpp swing from a 15v PSU.

For reference, here is what a full size LuFo looks like with a linear cap Mx PSU and a big enough heatsink to make 40w into 8ohms with a 28v rail. Still using a single LU1014D JFET to make the music.
Click the image to open in full size.

Measurements on full size LuFo show 0.01% THD for 2.83Vrms into 10ohms with a superb harmonic profile:
Click the image to open in full size.

A great preamp for the full size LuFo is the OPA454 that I recently made:
Click the image to open in full size.

Built in +/-35v PSU on the sub mezzanine:
Click the image to open in full size.

Click the image to open in full size.

Of course, for HPA duties, only +/-12v would be required for an opamp stage.

For your reference, I used this cap Mx design by Juma. Use a 1000uF cap instead of the 220uF to get a very slow ramp up to prevent SMPS hiccup mode from happening. I also used a TO247 N channel MOSFET like IRP240 to handle more current easily.
Click the image to open in full size.

Edit Oct 28, 2021: the manufacturing data and Gerber files are located here.

The LuFoLite was demonstrated to work well with a 12v 20w halogen lightbulb as the resistor R3 in the schematic above and cam be used with a 24v SMPS for 1.63A bias current and 20v rail after the cap multiplier.
Click the image to open in full size.

Last edited by xrk971; 29th October 2021 at 07:06 AM.
  Reply With Quote
Old 18th July 2021, 12:55 PM   #2
poseidonsvoice is offline poseidonsvoice  United States
Poseidon's Voice
diyAudio Member
 
poseidonsvoice's Avatar
 
Join Date: Jul 2004
Location: NC
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
X,

I was just commenting to a colleague of mine that you are a never ending machine; you never sleep, even though you say you do and you are probably healthier than most of the diyaudio members!

Thanks for the offshoot LuFo Lite! I have a pair of Lundahl 2773/3.5A on order, we'll see how it works out in a regular LuFo. I'm planning on wiring the coils in series for maximum inductance, and DCR should be 0.4 ohms or so.

On my MOFO, I have the Lundahl 2733 [running 2.5A bias, and both coils wired in parallel], at 10W RMS using Bode Plot analysis, the amp is flat (0db)at 10Hz. At 14W RMS (clipping on my design since my 'pre' stage has a max output of 31Vpp), it is -3dB at 20Hz. I'm sure there is some core saturation of the choke at that point but it's good to know the little Lundahl choke can handle it.

Great experiments as always...

Best,
Anand.
__________________
NPXP
Science is not a democracy - Earl Geddes; DIYAudio is a journey not a destination!

Last edited by poseidonsvoice; 18th July 2021 at 01:02 PM.
  Reply With Quote
Old 18th July 2021, 01:06 PM   #3
xrk971 is offline xrk971  United States
Got Foam?
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Metro DC (Virginia)
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
Thank you for the kind words, Anand. For the record, I got 7 hours of sleep last night! I do run 5-6 miles a day though, everyday, rain or shine. I pay my sleep dues now, you already paid yours years ago in your precession when we were both young men.

Thanks for sharing with us that the Lundhals work well. To get 10Hz performance is very respectable, so it seems they are less prone to saturating than the MOTs. I suspect for headphone duties we won’t have any issue with saturation of the MOTs.

Btw, I just got word that samples of my custom EI balanced dual primary choke has been built and will ship out tomorrow. That will be interesting to have the balanced drive LuFo with 100w into 8ohms from a 28v rail.
  Reply With Quote
Old 18th July 2021, 07:55 PM   #4
lineup is offline lineup  Sweden
diyAudio Member
 
lineup's Avatar
 
Join Date: Dec 2005
Location: the north
How good is your spice model of LU1014D ?
I have this:
Code:
.model LU1014D NJF(Beta=28 Rs=4.6m Rd=4.6m Betatce=-.5 Lambda=.9 Vto=-1.15 
+ Vtotc=-2.5m Cgd=363p M=.3805 Pb=.4746 Fc=.5 Cgs=784p Isr=84.77p Nr=2 
+ Is=8.477p N=1 Xti=3 Alpha=10u Vk=100 Kf=111.3E-18 Af=1)
And you have this:
Code:
.model LU1014D NJF(VTO=-1.8 BETA=29000M LAMBDA=0.18 RD=0.0065 CGD=363P CGS=784P VTOTC=-2.6M)
Which one is closer to reality?
__________________
lineup
  Reply With Quote
Old 18th July 2021, 08:30 PM   #5
xrk971 is offline xrk971  United States
Got Foam?
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Metro DC (Virginia)
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
Cool. Let me test your model.
  Reply With Quote
Old 18th July 2021, 09:46 PM   #6
nautibuoy is offline nautibuoy  United Kingdom
diyAudio Member
 
nautibuoy's Avatar
 
Join Date: Jan 2010
Location: Somerset, England
Quote:
Originally Posted by xrk971 View Post
...For the record, I got 7 hours of sleep last night! I do run 5-6 miles a day though, everyday, rain or shine.
Anand is right in his comments about your productivity X - I cycle an average of 20miles, 6 days a week and generally sleep like a baby but I can't imagine churning through the builds and expirements you manage.
  Reply With Quote
Old 18th July 2021, 09:57 PM   #7
xrk971 is offline xrk971  United States
Got Foam?
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Metro DC (Virginia)
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
Hi Ray,
It’s through the help of all my friends that make all this possible. JPS64, Jhofland, Vunce, Zman01, and many of you out there on DIYA who give encouragement. This amp is an easy 1 hour experiment if you have a heatsink and a SMPS, the LU1014D, a MOT and a few components handy.
  Reply With Quote
Old 19th July 2021, 03:11 AM   #8
xrk971 is offline xrk971  United States
Got Foam?
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Metro DC (Virginia)
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
I finally assembled the LuFo Lite in stereo. I settled on 1.5ohm 2% 10w Dayton speaker crossover resistor below the MOT. This gave 1.3A bias current and using matched JFETs from the GB the bias currents are almost perfectly matched as you can see the voltage readings across the 1.5ohm resistors. It’s powered by a 12v SMPS from an SMSL Class D amp that I had lying around. After the cap Mx, the voltage at the drain of the LU1014D is about 8.0v. I think this is all that’s needed for most headphones as the output swing is about 85% of 2x Vsupply or about 13.6Vpp for this case. That’s good enough for about 700mW into 32ohms.

LuFo Lite - a 1 Transistor SE Class A Headphone Amp-ea33c8cc-e28a-48db-9c8a-fe27d2a9e1ca-jpeg

LuFo Lite - a 1 Transistor SE Class A Headphone Amp-abffc6a7-f9ad-4b0c-8bdd-0a61e4e27b40-jpeg

LuFo Lite - a 1 Transistor SE Class A Headphone Amp-74bfee5c-937c-4651-bf83-6584da36a363-jpeg

I connected it to my Khadas Tone Board DAC and playing Amazon Ultra HD tracks - I am immediately struck by how good it sounds. Very clear and transparent. Very dynamic and powerful. Being a zero feedback amp, it images very well. It is also absolutely silent. Cannot tell it is on if music is not playing.

First track was Lithium by Nirvana - nice! Then Back in Black by AC/DC - Super!
The next up was Us and Them by Pink Floyd - amazing.

I can immediately tell that this amp is special. Perhaps one of the best headphone amps I have ever heard, no joke. And I have heard a lot of headphone amps.
Attached Images
File Type: jpeg EA33C8CC-E28A-48DB-9C8A-FE27D2A9E1CA.jpeg (556.1 KB, 1959 views)
File Type: jpeg ABFFC6A7-F9AD-4B0C-8BDD-0A61E4E27B40.jpeg (492.0 KB, 1796 views)
File Type: jpeg 74BFEE5C-937C-4651-BF83-6584DA36A363.jpeg (546.1 KB, 1269 views)
  Reply With Quote
Old 19th July 2021, 04:00 AM   #9
xrk971 is offline xrk971  United States
Got Foam?
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Metro DC (Virginia)
LuFo Lite - a 1 Transistor SE Class A Headphone Amp
Quote:
Originally Posted by lineup View Post
How good is your spice model of LU1014D ?
I have this:
Code:
.model LU1014D NJF(Beta=28 Rs=4.6m Rd=4.6m Betatce=-.5 Lambda=.9 Vto=-1.15 
+ Vtotc=-2.5m Cgd=363p M=.3805 Pb=.4746 Fc=.5 Cgs=784p Isr=84.77p Nr=2 
+ Is=8.477p N=1 Xti=3 Alpha=10u Vk=100 Kf=111.3E-18 Af=1)
And you have this:
Code:
.model LU1014D NJF(VTO=-1.8 BETA=29000M LAMBDA=0.18 RD=0.0065 CGD=363P CGS=784P VTOTC=-2.6M)
Which one is closer to reality?
Hi Lineup,
Your model seems to give lower THD by about 2x less, and the bias current decreased from 1.7A to 1.1A. For the 8ohm case, I got 0.02% THD vs 0.04% from my model. I think previous measurements of THD with the model I orginally had was pretty accurate. Your model may be undersestimating the THD. Thanks for the model though.
  Reply With Quote
Old 19th July 2021, 07:29 AM   #10
lineup is offline lineup  Sweden
diyAudio Member
 
lineup's Avatar
 
Join Date: Dec 2005
Location: the north
Thanks for the info on testing models.
__________________
lineup
  Reply With Quote

Reply


LuFo Lite - a 1 Transistor SE Class A Headphone AmpHide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LuFo Amp - 39w SE Class A from 28v Rail xrk971 Pass Labs 786 25th November 2021 08:49 PM
Noir, a two transistor headphone amp: class-A, single ended, 150mA bias Mark Johnson Headphone Systems 334 14th November 2021 02:05 AM
OPA454 Front End for LuFo Amp xrk971 XRK Audio 14 4th November 2021 06:22 PM
Clone Audio Technica Class A AT-HA5000 FET Transistor Headphone Amplifier NTSBuilding Headphone Systems 51 21st December 2019 05:15 PM
Balanced Drive 2 Transistor SE Class A Headphone Amp xrk971 Headphone Systems 26 30th July 2019 01:44 PM


New To Site? Need Help?

All times are GMT. The time now is 09:14 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio
Wiki