Sign me up!Hi Folks,
I have good news. We can do the XSD flatpacks for $600 a pair. This is with 3/4in birch faced Tru-Ply and 3/4in MDF on the woofer array box as shown above. The flatpack will be packed in foam, cardboard corner protectors, and a large box with straps so will arrive in great shape.
Shipping only in USA. Typical cost from Texas to Virginia was about $115 via UPS.
Russellc
I'm already in the boat, filleted and cooked. Best news in some while!I feel myself being reeled in
Russellc
I have made the request for the CAD model to include holes for standard M6 x 30mm long fluted wooden dowel pins.
3 for the woofer box stack (thru hole for all 5 sheets)
6 for the baffle to woofer box (blind)
4 for the base to woofer box (blind)
These are the typical dowels we can use:
https://a.co/d/j8xXpAg
3 for the woofer box stack (thru hole for all 5 sheets)
6 for the baffle to woofer box (blind)
4 for the base to woofer box (blind)
These are the typical dowels we can use:
https://a.co/d/j8xXpAg
I was thinking the same thing originally. But then thought that the longer pieces might be tricky to push through if a tight interference fit for better alignment. The short ones are fluted and meant to tapped in with a hammer. They might actually provide a stiffer and straighter alignment than a long one with clearance.
I am no wood worker so happy to take suggestions from experienced woodworkers who have done something similar.
I am no wood worker so happy to take suggestions from experienced woodworkers who have done something similar.
Its an Ikea idea!I have made the request for the CAD model to include holes for standard M6 x 30mm long fluted wooden dowel pins.
3 for the woofer box stack (thru hole for all 5 sheets)
6 for the baffle to woofer box (blind)
4 for the base to woofer box (blind)
These are the typical dowels we can use:
https://a.co/d/j8xXpAg
View attachment 1189767
- Home
- Group Buys
- XSD Speaker Flatpack GB