Lots of people, nobody has solved it for certain, all the info is here: Amanero card now supporting DSD native * Issue #12 * lintweaker/xmos-native-dsd * GitHub
For all those who say "Invalid or not authorized transaction!" on the Chinese clone.
One very clever person from forum.vegalab.ru had a Chinese Amanero clone driver there.
AmaneroLoader.zip — Yandex.Disk
The program is primitive.
I just took a dump of the firmware of the original Amanero and stupidly pour it into the COM port of the zeroed Chinese clone.
All settings in .bat file.
Everything is simple there - the port number, into which we pour and actually dump the firmware as * .LOG
How to change .bat file:
You need to open the notebook and simply drag .bat into the notebook window, click save and open .bat
One very clever person from forum.vegalab.ru had a Chinese Amanero clone driver there.
AmaneroLoader.zip — Yandex.Disk
The program is primitive.
I just took a dump of the firmware of the original Amanero and stupidly pour it into the COM port of the zeroed Chinese clone.
All settings in .bat file.
Everything is simple there - the port number, into which we pour and actually dump the firmware as * .LOG
How to change .bat file:
You need to open the notebook and simply drag .bat into the notebook window, click save and open .bat
Last edited:
My DSD512 works perfectly. Firmware DSD512x48x44.i`m getting a pulsating hiss, when using DSD512.
Has anyone else had this problem, have you fixed it and how?
I have three Amanero modules. One I ordered in the very first group buy from Amanero directly. Two others I got from Twisted Pear.
I wonder which firmware I should install currently. The two later modules using the OEMtool117 I can put the CPLD_for_1081 and the firmware 2005be, is the latest version always best?
The oldest module I can only use OEM code Combo192 and get different firmwares? So CPLD_for_1080r and Firmware_192khz??
I wonder which firmware I should install currently. The two later modules using the OEMtool117 I can put the CPLD_for_1081 and the firmware 2005be, is the latest version always best?
The oldest module I can only use OEM code Combo192 and get different firmwares? So CPLD_for_1080r and Firmware_192khz??
Last edited:
Hi, I have one of these Amanero-clones. It seems to only be able to output DSD. No matter what format I put in, it always comes out as DSD. Even when I just power it via USB without data line, the DSD Clock (BCK) pin starts outputting a 2.8 Mhz clock signal by default.
I would like to be able to output I2S as well. Tried messing around with the firmware but this being a clone the official updater tool doesn't support it ("transaction not authorized").
Anyone having the same experience? Any solutions?
I would like to be able to output I2S as well. Tried messing around with the firmware but this being a clone the official updater tool doesn't support it ("transaction not authorized").
Anyone having the same experience? Any solutions?
Last edited:
Any solutions?
What driver are you using? What OS?
Hi,
I have a problem with updating the firmware of my Amanero, sent an email to Domenico but I get no reply, anyone knows a way to contact him? I get the "invalid or not authorized request" message which happens to fake devices but mine is not, I believe, I think I bought it years ago from him.
I have a problem with updating the firmware of my Amanero, sent an email to Domenico but I get no reply, anyone knows a way to contact him? I get the "invalid or not authorized request" message which happens to fake devices but mine is not, I believe, I think I bought it years ago from him.
Attachments
Hi Forane12, please write to support@amanero.com to contact Domenico.
Thank you!
Thank you!
Hi,
I have a problem with updating the firmware of my Amanero, sent an email to Domenico but I get no reply, anyone knows a way to contact him? I get the "invalid or not authorized request" message which happens to fake devices but mine is not, I believe, I think I bought it years ago from him.
- Home
- Vendor's Bazaar
- USB to I2S 384Khz - DSD Converter