• The Vendor's Bazaar forum is for commercial offers and transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

USB to I2S 384Khz - DSD Converter

Jump to Latest
#1,890
It seems that in my case DSD256 and DSD512 is not working under Windows.
HQ player for example hangs with Asio drivers. Working fine with DSD128 on standard drivers.

I suspect a problem in the firmware. I have received the board 10 days ago.
How I can check the actual firmware on the board?
 
#1,894
miksi said:
I've installed the latest Asio drivers 1.07 but still in drop down menus of different apps is 1.03. Maybe there are leftovers from previous version.
Perhaps Jackal has more information about new tools and firmwares?
Click to expand...

Unfortunately I don't, it has been almost impossible to reach Domenico the last months. I had a message from him a week ago but he didn't tell me anything we don't already know.

I have installed ASIO 1.07 and you are correct, it still reports itself as 1.03. Probably he forgot to update that part in the code. I wish he added two things to each release he makes (drivers, AISO, firmware): date and release log.
 
#1,896
Hi all,

Hope one of you can help with an answer to this hopefully quick question: I'd like to use the Amanero board with a DAC that requires 45 & 49 MHz in order to play 384 kHz. Is this possible as the onboard oscillators are 22.. & 24.. MHz?

Thanks for any insights you may have ;-)

Jesper
 
#1,897
gentlevoice said:
Hi all,

Hope one of you can help with an answer to this hopefully quick question: I'd like to use the Amanero board with a DAC that requires 45 & 49 MHz in order to play 384 kHz. Is this possible as the onboard oscillators are 22.. & 24.. MHz?

Thanks for any insights you may have ;-)

Jesper
Click to expand...


Hi
The Amanero works well when playing 352k, 384k in original setup..

med venlig hilsen
Caad
 
#1,899
Hi caad,

Pleased to meet another Dane here 🙂 Thanks for replying but maybe I should be more specific ... I need the MCLK output from the amanero board to be 45.. & 49.. MHz and if the onboard clocks are 22.. & 22.. MHz they need to be multiplied by 2 to make it work.

Do you know if the Amanero board does this?

Hilsen Jesper
 
#1,900
gentlevoice said:
Hi caad,

Pleased to meet another Dane here 🙂 Thanks for replying but maybe I should be more specific ... I need the MCLK output from the amanero board to be 45.. & 49.. MHz and if the onboard clocks are 22.. & 22.. MHz they need to be multiplied by 2 to make it work.

Do you know if the Amanero board does this?

Hilsen Jesper
Click to expand...

Hi

You can run external MCLK input with the new FW. this is what i have measured on the original .
Measured on Amanero I2S output
PCM Sample Rate(KHz) Bit Clock (BCLK) Master Clock (MCLK)
44,1 2,82 22,5792
88,2 5,6 22,5792
176,4 11,2896 22,5792
352,8 22,5792 22,5792
48 3,07 24,576
96 6,1 24,576
192 12,2 24,576
384 24,576 24,576


mvh
Caad
 
You must log in or register to reply here.
Top Bottom