I'm a bit cheap for that. I just used 1" MDF.
Now I just have to work out what to do with the two spare W22s.
😉
Now I just have to work out what to do with the two spare W22s.
😉
Love your site, your DIY kung fu is quite good 😀
I have been posting lots of OB designs, but have yet to build one myself, not sure I can even cut a round hole properly😱 I suppose that day will come soon after reading/looking at all these wonderful designs.
Jaz
jaz,
before i thought its a difficult task to do flush mount for the drivers, but as i found out, they are quite manageable to do.
all u need is router, either trimmer or plunge. use a straight bit with 10-12mm size.
make some simple jig, let say 10cm x 25cm 12mm plank, with screw hole for the router depth adjustment base. then punch a nail for the radius of ur drivers.
cheers
henry
before i thought its a difficult task to do flush mount for the drivers, but as i found out, they are quite manageable to do.
all u need is router, either trimmer or plunge. use a straight bit with 10-12mm size.
make some simple jig, let say 10cm x 25cm 12mm plank, with screw hole for the router depth adjustment base. then punch a nail for the radius of ur drivers.
cheers
henry
I have an even easier way. I just gave the plans for the front baffle to a kitchen manufacturer with a CNC router and let them do it for me.
I could have got them to do a nice gloss black finish, but instead I figured I'd stuff that up myself.
I could have got them to do a nice gloss black finish, but instead I figured I'd stuff that up myself.
Hey Guys,
Here is our DIY OB Hall of fame thread:
Hawthorne Audio • View topic - Hawthorne Audio and affiliates Hall Of Fame Pictures
Enjoy.
Cheers,
Darrel 🙂
Here is our DIY OB Hall of fame thread:
Hawthorne Audio • View topic - Hawthorne Audio and affiliates Hall Of Fame Pictures
Enjoy.
Cheers,
Darrel 🙂
Hey Jaz,
Thanks!
Check back often.
Contributions coming in from 40 countries. Amazing Wood artisans as well as day one beginners each having fun with DIY and enjoying music.
That's what it's all about.😎
Cheers,
Darrel 🙂
Thanks!
Check back often.
Contributions coming in from 40 countries. Amazing Wood artisans as well as day one beginners each having fun with DIY and enjoying music.
That's what it's all about.😎
Cheers,
Darrel 🙂
Attachments
what kind of bass loading is that? very interesting.
similar design as emerald physic? with short port?
cheers
henry
similar design as emerald physic? with short port?
cheers
henry
Look for "ripole" in this forum. There is lots of information. BTW: the ripoles above are "originals", designed by the patent holder himself.
hey, jazbo8
I have resized your pictures
I wont do it again
please resize your pictures
might be preferred to use forum upload service
best way to ensure the pics will stay
moderation
I have resized your pictures
I wont do it again
please resize your pictures
might be preferred to use forum upload service
best way to ensure the pics will stay
moderation
Well, there's definitely a lot of hand-blown stuff in the background... I only recognize it because it wasn't so long ago that my house looked like that! OP, care to chime in?
Where did I have my glasses? 😱 😱
When I saw the waveguide I didn't think any further. 🙄
You are right. Those are NOT originals. Those are.
Rudolf