They are not physically as big as I thought they would be pico, so a good size. Do you have any extras you are not going to use by any chance - like 4 off?
I could probably sell up to 8
What is IVA? (%22=55Euro), value added tax? Do US buyers pay IVA? Just curious.
As soon as you choose "USA" as country of destination VAT will disappear. It's like US Sales Tax but for european customers
I’m building the Stasis w the Susy FE. I know Zen Mod told me to wait but for learning, nothings better than hands on experience so I may not wait and try myself. If I fry some components, so be it
Nice one
The first chassis that I recently ordered is reserved for the SIT-3X. Thinking the big SIT hockey pucks can make good use of the large heat sinks and the interior room will allow for some serious bulk bypass caps.
The second chassis is still under consideration. The most recent Stasis boards look very interesting, and something different to try. I still have a pair of 2SK180 SITs that need a good home, so there are a couple designs to consider for those as well..
The second chassis is still under consideration. The most recent Stasis boards look very interesting, and something different to try. I still have a pair of 2SK180 SITs that need a good home, so there are a couple designs to consider for those as well..
I revised the front end of Papa's original Sony V2.
So that will definitely be one build.
I've got a stack of lateral mosfets so will probably do an output stage that will go with the Front end above.
Then a redesign of another Papa amp.
So at least 2 and maybe another 2 after that.
So that will definitely be one build.
I've got a stack of lateral mosfets so will probably do an output stage that will go with the Front end above.
Then a redesign of another Papa amp.
So at least 2 and maybe another 2 after that.
I found some Cardas RCA jacks and binding posts from a GB about 17 years ago.
I hope their sizes are the same as the current ones. Interestingly, some red
colour seems to have leached into the white insulator over the years.
Also, for those who won't be using XLR yet, I found this cover:
https://www.mouser.ca/ProductDetail/568-DBA/
I hope their sizes are the same as the current ones. Interestingly, some red
colour seems to have leached into the white insulator over the years.
Also, for those who won't be using XLR yet, I found this cover:
https://www.mouser.ca/ProductDetail/568-DBA/
I found some Cardas RCA jacks and binding posts from a GB about 17 years ago.
I hope their sizes are the same as the current ones. Interestingly, some red
colour seems to have leached into the white insulator over the years.
Compare them to the linked parts.
Ozorfis x 2
Kbergsson x 1
ItsAllInMyHead x 2
Pico x 2
BrianGasberg x 1
pwagner x 3
dantwomey x 1
Gary S x 2
wg45 x 1
windward x 1
Hey Bill x 2
GnuB x 1
Savu x 2
Tungsten Audio x 1
ARGOS x 1
Mirlo x 2
HiFiBlueDevil x 1
Blk Dynamite x 2
Sampsonite x 1
Dennis Hui x 2
PierreQuiRoue x 1
SubbuK x 1
Kbergsson x 1
ItsAllInMyHead x 2
Pico x 2
BrianGasberg x 1
pwagner x 3
dantwomey x 1
Gary S x 2
wg45 x 1
windward x 1
Hey Bill x 2
GnuB x 1
Savu x 2
Tungsten Audio x 1
ARGOS x 1
Mirlo x 2
HiFiBlueDevil x 1
Blk Dynamite x 2
Sampsonite x 1
Dennis Hui x 2
PierreQuiRoue x 1
SubbuK x 1
- Home
- Amplifiers
- Pass Labs
- Ultimate 4U 500mm Chassis - Who is interested?