As soon as you choose "USA" as country of destination VAT will disappear. It's like US Sales Tax but for european customers 🙂
Just ordered my set. I have the undrilled version (same dimensions) so I can use this one as a template to drill and tap the holes.
The first chassis that I recently ordered is reserved for the SIT-3X. Thinking the big SIT hockey pucks can make good use of the large heat sinks and the interior room will allow for some serious bulk bypass caps.
The second chassis is still under consideration. The most recent Stasis boards look very interesting, and something different to try. I still have a pair of 2SK180 SITs that need a good home, so there are a couple designs to consider for those as well..
The second chassis is still under consideration. The most recent Stasis boards look very interesting, and something different to try. I still have a pair of 2SK180 SITs that need a good home, so there are a couple designs to consider for those as well..
Hi pico, with regards to your answer in post #902, I tried to send you a PM ,but your mailbox is full. Can you fix that and send me a PM re buying them, thanks.
Good to hear what others are planning to build with this mighty pico chassis, very diverse collection of ideas. Pico, spill the beans - what builds are you planning?
I revised the front end of Papa's original Sony V2.
So that will definitely be one build.
I've got a stack of lateral mosfets so will probably do an output stage that will go with the Front end above.
Then a redesign of another Papa amp.
So at least 2 and maybe another 2 after that.
So that will definitely be one build.
I've got a stack of lateral mosfets so will probably do an output stage that will go with the Front end above.
Then a redesign of another Papa amp.
So at least 2 and maybe another 2 after that.
You will be busy pico, yet had better get another 2 chassis on order while you can.
Can you send me a PM re the caps, thanks.
Can you send me a PM re the caps, thanks.
I found some Cardas RCA jacks and binding posts from a GB about 17 years ago.
I hope their sizes are the same as the current ones. 🙂 Interestingly, some red
colour seems to have leached into the white insulator over the years.
Also, for those who won't be using XLR yet, I found this cover:
https://www.mouser.ca/ProductDetail/568-DBA/
I hope their sizes are the same as the current ones. 🙂 Interestingly, some red
colour seems to have leached into the white insulator over the years.
Also, for those who won't be using XLR yet, I found this cover:
https://www.mouser.ca/ProductDetail/568-DBA/
At least one thing is for sure Dennis, they would have been a lot cheaper 17 years ago. Well aged - like fine wine.
Just checked the Modushop webpage for the 2 types of chassis in this GB, and Gianluca now has 33 ordered. Going well.
Still haven't had time to complete my front panel drawing, so will order sometime next week.
One more question: the front panel has led holes, will the black front panel be anodized after drilling those holes?
One more question: the front panel has led holes, will the black front panel be anodized after drilling those holes?
I am sure Gianluca will confirm that all anodizing is done after all holes and cutouts are punched in the panels.
@Gianluca, Just now ordered and paid for one chassis through PayPal. Order ID: #9104.
Thanks
Subbu K
Thanks
Subbu K
Ozorfis x 2
Kbergsson x 1
ItsAllInMyHead x 2
Pico x 2
BrianGasberg x 1
pwagner x 3
dantwomey x 1
Gary S x 2
wg45 x 1
windward x 1
Hey Bill x 2
GnuB x 1
Savu x 2
Tungsten Audio x 1
ARGOS x 1
Mirlo x 2
HiFiBlueDevil x 1
Blk Dynamite x 2
Sampsonite x 1
Dennis Hui x 2
PierreQuiRoue x 1
SubbuK x 1
Kbergsson x 1
ItsAllInMyHead x 2
Pico x 2
BrianGasberg x 1
pwagner x 3
dantwomey x 1
Gary S x 2
wg45 x 1
windward x 1
Hey Bill x 2
GnuB x 1
Savu x 2
Tungsten Audio x 1
ARGOS x 1
Mirlo x 2
HiFiBlueDevil x 1
Blk Dynamite x 2
Sampsonite x 1
Dennis Hui x 2
PierreQuiRoue x 1
SubbuK x 1