Thanks for the replies, everybody. But, I guess I didn't ask the right question. I know what the current is and how to decrease it. The question should be: How would I determine the optimum current and what is the minimum current without sacrificing too much sound quality? Add on: what are the best semis to use for optimum/minimum current?
Feeding the input capacitance of the six output transistors with enough current is my biggest concern-I guess I should do it the hard way and try to use that calculus I supposedly learned. . .
Feeding the input capacitance of the six output transistors with enough current is my biggest concern-I guess I should do it the hard way and try to use that calculus I supposedly learned. . .
up
Hi,🙂
this is my almost finished up: I must anodize with titanium color front and rear pannel and upper cover with black pain.
It sounds really fantastic: precision,extension, separation and force are present at a very high degree.
I have only a little problem with the vumeter: it is really difficult to stop it in the middle of the line: after tuned in that position it wander apparently without control returning slowly at the beginning of the scale or going with same speed at the end-scale.
Anyway a great great amp: with ugs a perfect marriage!
Thank you Cheff!🙂
Hi,🙂
this is my almost finished up: I must anodize with titanium color front and rear pannel and upper cover with black pain.
It sounds really fantastic: precision,extension, separation and force are present at a very high degree.
I have only a little problem with the vumeter: it is really difficult to stop it in the middle of the line: after tuned in that position it wander apparently without control returning slowly at the beginning of the scale or going with same speed at the end-scale.
Anyway a great great amp: with ugs a perfect marriage!
Thank you Cheff!🙂
Attachments
Even with matching number of mounting holes in the V2, 24 times 7 times 2 still is a lot of holes to fill. 
Even with matching number of mounting holes in the V2, 24 times 7 times 2 still is a lot of holes to fill.
Spent about half an hour on soldering all those resistors 🙂
Ciao,
Anto
Thank you NYCone🙂
Have you tested yours ?
Did you have problems regarding vumeter setting?
Anto
Nice job 10y, wish I had access to a metal workshop to build some nice art rather than my usual cardboard box
Then do a woody.
Front plates in wood can be (hand) painted to look like anything you desire ; Anodised aluminum, marble, granite,...ehh, wood.
And easy to repair, try fix a scratch on an anodised metalico.
Front plates in wood can be (hand) painted to look like anything you desire ; Anodised aluminum, marble, granite,...ehh, wood.
And easy to repair, try fix a scratch on an anodised metalico.